Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
Tier1
TIER1-CP5-934
10 X 4.5 Pleated Polyester Replacement Filter (5 micron)
$18.83
Fits most standard housings built for 10-inch x 4.5-inch filter cartridges
Ships fast!
Installs quickly and easily
Delivers filtered water throughout your home
Can be rinsed to prolong the life of the filter
format_list_bulletedFeatures & Specs
Package Qty: 1
Manufacturer: Tier1
Manufacturer's Id: CP5-934
UPC: 700355940913
Actual Size (in): 9 3/4 inches (length) x 4 1/2 inches (outside diameter)
Media: Pleated Polyester
Primary Filter Media: Pleated Polyester
Operating Temperature (°F): 40 - 125
Operating Temperature (°C): 4.4 - 51.7
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
Brand: Tier1
Advertised Size: 10 x 4-1/2
Depth (in): 4.5 in
Length (in): 9.75 in
Outside Diameter (in): 4.5 in
Width (in): 4.5 in
Media Type: Sediment Filter
UPC's For Search: 700355940913 | 33663005129 | 70033663005128 | 33663005129
Micron Rating Nominal: 5
descriptionInstructions
Turn off water supply. Press red pressure-relief button (if present)
Unscrew housing. Remove large o-ring, wipe clean and set aside
Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
Insert new filter cartridge
Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation
warning_amberContaminants Reduced
Dirt Sand Sediment
Hard Scale
Particles
Rust And Corrosion
Sand
Sand Coarse
Sand Extra Fine
Sand Fine
Sediment
Silt
filter_altFilter Life
Filter Life (gallons): 6 months
verified_userWarranty Info
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
Tier1 CP5-934 Filter Advantages
The Tier1 Culligan CP5-BBS-D comparable whole house sediment water filter is manufactured for 10 x 4.5-inch filter housings. Tier1 water filters go to work quickly reducing the sediment, sand, dirt, hard scale, rust, and silt that plague water. Polyester pleats hold up better to prolonged usage than cellulose fiber options and allow for improved flow rates. Rest assured with Tier1's Unconditional Product Guarantee for Life of the Product. Order the Tier1 Culligan CP5-BBS-D comparable whole house sediment water filter today!
Pleated Filter Media
The Tier1 CP5-934 uses pleated filter design to maximize contaminant exposure to filter media. More time along the media allows for higher capture and retention of unwanted contaminants. This also allows for greater amounts of larger particles of sediment and sand to collect within the pleats of the filter. This pleated design enhances structural stability and helps increase the performance of the filter. Pleated filter media can be rinsed for extended life capacity, if extensive staining or slight tearing and rips appear the filter must be replaced.
Universal Filter Sizing
The 10 X 4.5 Tier1 CP5-934 pleated polyester replacement filter is built to fit 10-inch x 4.5-inch filter housings. This standard sizing allows this filter to easily replace existing styles of whole house filters for housings requiring 10 x 4.5 inch filters. The CP5-934 goes to work immediately providing cleaner, fresher water for up to six months. Enjoy cleaner better water with your whole house replacement filter today.
TIER1-CP5-934 is comparable with the following part number(s)