Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
Tier1
TIER1-P5-10
10 X 2.5 Inch 5 micron Polypropylene Replacement Filter by Tier1
$8.41
Fits into most industry standard 10-inch water filtration system housings
Goes work immediately and lasts for up to 6 months
Reduces many common contaminants from your water
Polypropylene construction inhibits the growth of bacteria
Supports a flow rate of up to 5 gallons per minute (gpm)
format_list_bulletedFeatures & Specs
Package Qty: 1
Manufacturer: Tier1
Manufacturer's Id: P5-10
UPC: 799932624926
Actual Size (in): 9 7/8 inches (length) x 2 7/16 inches (outside diameter)
Primary Filter Media: Polypropylene
Operating Temperature (°F): 40 - 145
Operating Temperature (°C): 4.4 - 62.8
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
Brand: Tier1
Advertised Size: 10 x 2-1/2
Depth (in): 2.44 in
Length (in): 9.88 in
Outside Diameter (in): 2.44 in
Width (in): 2.44 in
Media Type: Sediment Filter
UPC's For Search: 799932624926 | 10051678357436 | 051678357439
Micron Rating Nominal: 5
descriptionInstructions
Turn off water supply. Press red pressure-relief button (if present)
Unscrew housing. Remove large o-ring, wipe clean and set aside
Discard used filter cartridge
Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
Insert new filter cartridge
Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation
warning_amberContaminants Reduced
Dirt Sand Sediment
Rust And Corrosion
Sand
Sediment
Silt
filter_altFilter Life
Filter Life (gallons): 6 months
verified_userWarranty Info
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
TIER1-P5-10 Filter Advanatges
The Pentek P5 comparable whole house sediment water filter by Tier1 works hard providing you with cleaner, fresher great-tasting water. The P5-10 by Tier reduces contaminants down to 5 microns for up to six months. Affordably priced and using standardized sizing this filter is an excellent replacement filter for your whole house system housing. Enjoy the benefits of filtered water and order your replacement polypropylene sediment filter today!
Polypropylene Sediment Filter
Polypropylene-constructed filters inhibit bacterial growth making them an ideal option for both municipal and well water applications. These filters are effective at capturing contaminants such as sand, sediment, silt, and more. Unlike carbon filter cartridges you won't have to worry about small carbon fines potentially spilling into your water, while still enjoying the benefits of filtered water throughout your home. Polypropylene filters are great for whole house water filtration and can be used as effective pre-filters for whole house or point-of-use systems.
Universal Filter Sizing
The 10 X 2.5 polypropylene replacement filter by Tier1 is built to fit 10-inch x 2.5-inch filter housings. This standard sizing allows this filter to easily replace existing styles of whole house filters for housings requiring 10 x 2.5-inch filters. The P5-10 goes to work immediately providing cleaner, fresher water for up to six months. Enjoy cleaner better water with your whole house replacement filter today.
TIER1-P5-10 is comparable with the following part number(s)