The Ametek HD-10 Whole House Water Filter System is now manufactured by Pentek. Replacement filters and parts are available below.
The Ametek HD-10 water filtration housing has a 1" inlet/outlet.
Your Ametek HD-10 housing color may vary from the picture on the left.
The Ametek HD-10 Whole House System uses 10" L x 4.5" W water filters. There are many filters that fit the Ametek HD-10 filter system.
The Ametek HD-10 water filter change interval will vary due to your water quality and the amount of water used.
Ametek Kleen-Plus HD-10 Whole House Water Filter System:
Select one of the 10" L x 4.5" W water filters for the Ametek HD-10 system. The following 3 filters are popular filters for this system.
1) The R50-BB water filter is a 50 micron pleated sediment water filter that fits the HD-10 system.
2) The DGD-5005 water filter is a 5 micron polypropylene sediment water filter that fits the HD-10 system.
3) The GAC-BB water filter is a granular activated carbon water filter that fits the HD-10 system. Carbon filters improve taste and odor and reduce chlorine taste and odor.
If you need to replace the entire housing, the HD-950 whole house filter housing can be purchased here.
Ametek HD-10 Filter System Parts & Accessories:
O-Ring: The OR-100 oring seals the cap to the bottom sump of the housing to prevent leaks. The OR-100 o-ring should be replaced approximately every two to three filter changes.
O-Ring Lubricant: Use o-ring lubricant to lubricate the OR-100 O-Ring.
Wrench: Use the SW-3 wrench to loosen the filter housing.
Sump (Bottom of Housing): Replacement #10 Big Blue Sumps are available. This is the bottom part of the housing that holds the filter.
Ametek HD-10 Water Filter Housing Also Known As:
Ametek HD10 Whole House Housing
Ametek HD-10R50 / HD10R50 Whole House Housing
Ametek HD-10-R50-BB / HD10R50BB Whole House Housing
Ametek HD-10-R50-BBS / HD10R50BBS Whole House Housing
Help Me Order!
Contact Us M-F 9-5 CST
(612) 605-6910
(888) 801-PURE