The Ametek HD20-10 Whole House Water Filter System is now manufactured by Pentek. Replacement filters and parts are available below.
The Ametek HD20-10 and Ametek HD20-10-HFPP water filtration housing has a 1" inlet/outlet.
Your Ametek HD20-10 housing color may vary from the picture on the left.
The Ametek HD20-10-HFPP Whole House System uses 20" L x 4.5" W water filters. There are many filters that fit the Ametek HD20-10 filter system.
The Ametek HD20-10 water filter change interval will vary due to your water quality and the amount of water used.
Ametek Kleen-Plus HD20-10-HFPP Whole House Water Filter System:
Select one of the 20" L x 4.5" W water filters for the Ametek HD20-10 system. The following 3 filters are the most popular filters for this system.
1) The R30-20BB water filter is a 30 micron pleated sediment water filter that fits the HD20-10 system. This filter should not be used with non-chlorinated water.
2) The DGD-5005-20 water filter is a 5 micron polypropylene sediment water filter that fits the HD20-10 system. This filter can be used on chlorinated or non-chlorinated water supplies.
3) The GAC-20BB water filter is a granular activated carbon water filter that fits the HD20-10 system. Carbon filters improve taste and odor and reduce chlorine taste and odor.
If you need to replace the entire housing, the 20-BB whole house filter housing can be purchased here.
Ametek HD20-10-HFPP Filter System Parts & Accessories:
O-Ring: The OR-100 oring seals the cap to the bottom sump of the housing to prevent leaks. The OR-100 o-ring should be replaced approximately every two to three filter changes.
O-Ring Lubricant: Use o-ring lubricant to lubricate the OR-100 O-Ring.
Wrench: Use the SW-4 wrench to loosen the filter housing.
Ametek HD20-10 Water Filter Housing Also Known As:
Larger View
Features