- CUNO EVP-2400 Everpure Replacement Filter:
- The CUNO EVP2400 articulate reduction down to 0.5 micron helps capture common water borne cysts such as giardia and cryptosporidium.
- The CUNO Water Factory EVP2400 modified carbon block media yields greater depth of granular carbon for quality chlorine taste & odor reduction efficiency and life.
- 1,400 gallons (5,300 liters) chlorine taste & odor reduction, as tested to NSF Standard 42.
- Cyst & lead reduction as tested to NSF Standard 53.
- Manufactured with FDA food grade components (CFR-21) for all drinking water applications.
- Significantly reduces carbon fine bleed typically found upon start up.
The CUNO Water Factory EVP2400 is not available. Order the original
Everpure H-104 Replacement Filter below.
- CUNO Water Factory EVP2400 Specs:
- Height: 14 3/8"
- Maximum Diameter: 3 5/8"
- Maximum Flow Rate: 0.5 gpm (1.9 lpm)
- Water Temperature: 40°-100°F (4.4°-38°C)
- Water Pressure: 25-100 psi (172-690 kPa)
- Degree of Filtration: 0.5 micron
- Capacity: 1,400 Gallons
(5,300 Liters)
- CUNO Water Factory EVP2400 Contaminant Reduction:
- Parasitic Protozoan Cysts: 99.99%
- Turbidity: 99%
- Lead @ pH 6.5: 99.4%
- Lead @ pH 8.5: 99.3%
- Chlorine Taste & Odor: 99%
- Particulate: 99.9%
- Manufacturer: CUNO Water Factory 47-221502
- CUNO Water Factory EVP2400 Everpure Replacement Filter Information:
- Use as a replacement in the Everpure H-104 Water Filter System
- The CUNO Water Factory EVP 2400 filter cartridge MUST be replaced every 12 months, at the rated capacity or if a noticeable reduction in flow rate occurs.
- CUNO Water Factory EVP2400 Installation Tips:
- Read and follow use instructions before installation and use of this system.
- Installation and use MUST comply with all state and local plumbing codes.
- Protect from freezing, remove filter cartridge when temperatures are expected to drop below 40°F (4.4°C).
- Do not install on hot water supply lines. The maximum operating water temperature of this filter system is 100°F (37.8°C).
- Do not install if water pressure exceeds 100 psi (689 kPa). If your water pressure exceeds 80 psi (552 kPa), you must install a pressure limiting valve. Contact a plumbing professional if you are uncertain how to check your water pressure.
- Do not install where water hammer conditions may occur. If water hammer conditions exist you must install a water hammer arrester. Contact a plumbing professional if you are uncertain how to check for this condition.
Larger View
Features
