select Compare (0)
Compare Products

You have no items to compare.

Culligan H-53 and Culligan H53 Aqua Cleer Reverse Osmosis System Compatible Filters

More Views

Culligan H-53 and Culligan H53 Aqua Cleer Reverse Osmosis System Compatible Filters

The Culligan H-53 and Culligan H53 Aqua Cleer Reverse Osmosis System Compatible Filters is no longer available.
We distribute compatible filters for the Culligan H53 Aqua Cleer Reverse Osmosis System. Stage 1: RS-23-SED5, Stage 2: PRE-RO, Stage 3: CTA-16-C Stage 4: K2333-JJ 1/4 inch Quick Connect Fittings - OR - K2333-KK 3/8 inch Quick Connect Fittings. Note: Most H53 models use the 1/4 inch Inlet/Outlet post filter. A few H53 models use the 3/8 inch Inlet/Outlet post filter.
  • Culligan H53 AquaClear Reverse Osmosis System Stages:
  • Stage 1: The Culligan Compatible RS-23-SED5 Sediment Pre-Filter is a 5 micron sediment filter used in the first stage. It screens out dirt, sediment, sand, rust and other physical particles. The Stage 1 filter should be changed every 3 - 6 months depending on the level of sediment in your water. Culligan Compatible 01-4015-38, 00-0001-20, 4412-75, 4496-27, S7011C, 4485-44, 4496-27.

  • Stage 2: The PRE-RO Carbon Block Water Filter is used in the second stage. It reduces chlorine taste and odor that may be in your water supply. The Stage 2 filter should be changed every 6-12 months. Culligan Compatible 01-0125-80, 00-0011-38, 01-0042-91, 01-0000-78, 4027-96, 4487-63, 4496-28, 4487-62.

  • Stage 3: The CTA-16-C RO Membrane goes in the third stage. It is a 16 GPD membrane. The Stage 3 RO membrane should be changed every 2 years. Culligan Compatible 00-4428-45, 01-0082-56, 1224433, TFM-18-C.

  • Stage 4: The K2333-JJ 1/4" Inlet/Outlet post filter is the 4th stage. The polishing filter reduces chlorine taste and odor that may be in your water supply. The Stage 4 filter should be changed every 6-12 months. Culligan Compatible 01-0000-79, 01-0001-24.
    Note: A few H-53 models have a 3/8" Inlet/Outlet for the post filter. For 3/8" Inlet/Outlets, order the K2333-KK Post-Carbon Filter (Culligan Compatible 01-0042-91).
  • Culligan H53 Aqua Cleer Reverse Osmosis System Water Filter Change Intervals:
  • The filter change interval will vary due to your water quality and the amount of water used.
  • Culligan H-53 Aqua Cleer RO System Parts & Accessories:
  • Culligan H-53 O-Ring: OR-ACH. The o-rings should be replaced every filter change.
  • Culligan Aqua Cleer O-Ring Lubricant: OR-LUBRICANT-LG. O-Rings should be greased on every filter change with food-grade o-ring lubricant.
  • Culligan H-53 RO Tank: RO-T25-P. Replace tank when needed.
  • Culligan H-53 Aqua Cleer RO Tank Pressure Gauge: TPG-100. Monitor tank pressure to keep reverse osmosis system running optimally.


Disclaimer: Culligan International Company is the registered owner of the trademark Culligan. This replacement product is not manufactured, endorsed, or approved by the Culligan International Company. Part numbers and photographs of products and systems are used for identification purposes only and do not demonstrate an association with the Culligan International Company. This site makes no representation as to the effect the use of this replacement product may have on any warranty that you received with the purchase of a Culligan system.

Instructions

No reviews have been found

Write Your Own Review

You're reviewing: Culligan H-53 and Culligan H53 Aqua Cleer Reverse Osmosis System Compatible Filters

  •  
    1 star
    2 stars
    3 stars
    4 stars
    5 stars
    Rating
  • * Required Fields