select Compare (0)
Compare Products

You have no items to compare.

Culligan H-8 and Culligan H8 Aqua Cleer Reverse Osmosis System Compatible Filters

More Views

Culligan H-8 and Culligan H8 Aqua Cleer Reverse Osmosis System Compatible Filters

The Culligan H-8 and Culligan H8 Aqua Cleer Reverse Osmosis System Compatible Filters is no longer available.
We distribute compatible filters for the Culligan H8 Aqua Cleer Reverse Osmosis System. Stage 1: PRE-RO, Stage 2: TFM-18-A, Stage 3: K2333-JJ 1/4 inch Quick Connect Fittings - OR - K2333-KK 3/8 inch Quick Connect Fittings. Note: Most H-8 models use the 1/4 inch Inlet/Outlet post filter. A few H-8 models use the 3/8 inch Inlet/Outlet post filter.
  • Culligan H8 AquaClear Reverse Osmosis System Stages:
  • Stage 1: The PRE-RO Carbon Block Water Filter is used in the first stage. It reduces chlorine taste and odor that may be in your water supply. The Stage 1 filter should be changed approximately every 6 months. Culligan Compatible 01-0125-80, 00-0011-38, 01-0042-91, 01-0000-78, 4027-96, 4487-63, 4496-28, 4487-62.

  • Stage 2: The TFM-18-A RO Membrane goes in the second stage. It is an 18 GPD membrane. The Stage 2 RO membrane should be changed every 2 years. Culligan Compatible 01-0001-45, 00-4493-72, 00449372 4493-72.

  • Stage 3: The K2333-JJ 1/4" Inlet/Outlet post filter is the 3rd stage. The polishing filter reduces chlorine taste and odor that may be in your water supply. The Stage 3 filter should be changed every 6-12 months. Culligan Compatible 01-0000-79, 01-0001-24.
    Note: A few H-8 models have a 3/8" Inlet/Outlet for the post filter. For 3/8" Inlet/Outlets, order the K2333-KK Post-Carbon Filter (Culligan Compatible 01-0042-91).
  • Culligan H8 Aqua Cleer Reverse Osmosis System Water Filter Change Intervals:
  • The filter change interval will vary due to your water quality and the amount of water used.
  • Culligan H8 Aqua Cleer RO System Parts & Accessories:
  • Culligan H8 O-Ring: OR-ACH. The o-rings should be replaced every filter change.
  • Culligan Aqua Cleer O-Ring Lubricant: OR-LUBRICANT-LG. O-Rings should be greased on every filter change with food-grade o-ring lubricant.
  • Culligan H8 RO Tank: RO-T25-P. Replace tank when needed.
  • Culligan H-8 Aqua Cleer RO Tank Pressure Gauge: TPG-100. Monitor tank pressure to keep reverse osmosis system running optimally.


Disclaimer: Culligan International Company is the registered owner of the trademark Culligan. This replacement product is not manufactured, endorsed, or approved by the Culligan International Company. Part numbers and photographs of products and systems are used for identification purposes only and do not demonstrate an association with the Culligan International Company. This site makes no representation as to the effect the use of this replacement product may have on any warranty that you received with the purchase of a Culligan system.

Instructions

No reviews have been found

Write Your Own Review

You're reviewing: Culligan H-8 and Culligan H8 Aqua Cleer Reverse Osmosis System Compatible Filters

  •  
    1 star
    2 stars
    3 stars
    4 stars
    5 stars
    Rating
  • * Required Fields