| | | |

Water Filters made EASY at

WATER FILTER FINDER^TM in 0 item(s) in cart / TOTAL: $0.00 View Cart

| | | | |
| | | |

GE Osmonics Desal TFM-75-CV Reverse Osmosis Membrane

75 Gallons Per Day; Includes Control Valve & Flow Control; Part # 1223077, TFM-75-EB, TFM-75-EN

GE Osmonics Desal TFM-75-CV Reverse Osmosis Membrane:
GE TFM-75-CV is a 75 Gallon per Day Encapsulated Reverse Osmosis Membrane which includes a Control Valve & Flow Control.
The GE TFM-75-CV has color-coded ports and quick connect fittings for easy connection to an existing system.
The GE TFM-75-CV has a built-in permeate check-valve which eliminates the need for additional fittings and reduces the potential for water leaks within the system.
Unlike conventional filtration which can be maintenance-intensive, membrane-separation technology uses crossflow filtration where impurities are captured on the membrane and are constantly swept away by the concentrate stream. Thus the membrane surface is continuously cleaned, which prolongs the life of the membrane and reduces maintenance costs.The spiral-wound membrane element is constructed of one or more membrane envelopes which are wound around a perforated central tube. The permeate water passes through the membrane into the envelope and spirals inward to the central tube.
The GE TFM-75-CV is a Thin-Film Membrane.
The GE Desal TFM-75-CV RO Membrane is not chlorine resistant. A chlorine taste and odor reduction water filter must be used before the RO membrane if chlorine is present in your water supply.

GE Osmonics Desal TFM-75-CV Reverse Osmosis Membrane Specs:
75 Gallons Per Day
ANSI/NSF 58 listed for material safety and structural integrity.
ANSI/NSF 58 listed for performance.
Materials: Polypropylene
Dimensions: 2.5" W X 13.25" L
Maximum Temperature: 120°F (48.9° C)
Maximum Pressure: 90 psi (6.2 bar)
Feed, Concentrate and Product Water Connections: 1/4-inch Quick Connect
Average NaCl Rejection (%): 96.0
Permeate Flow* gpd @ 65 psi: 75
*Permeate flow specifications are based on 500 mg/L NaCl solution at 65 psi (4.5 bar) inlet pressure, 77°F (25°C), 15% recovery after 24 hours. Individual element flux may vary ±15%.