Doulton W9121202 SuperSterasyl Ceramic Candle Water Filter for CS-MINI

• Doulton SuperSterasyl W9121202 Personal Gravity Filter:
• The SuperSterasyl 6" (S) Doulton W9121202 filter candle works in the Doulton CS-MINI Personal Gravity Filter Housing.
• Doulton Personal Gravity Filter Housings are made from high grade polished stainless steel.  The housing is easy to clean and very durable.
• The Doulton AquaCera filtration system does not require power.  The system uses gravity to filter the water. 
• Doulton filters are cleanable for prolonged life.
• The SuperSterasyl is Silver-impregnated to prevent mitosis.

• Doulton Sterasyl Plus Ceramic Filter Reduces:
• 0.9 Micron absolute
• >98% Efficiency at 0.2 micron
• >90% Efficiency at 0.05 micron
• 100% removal of cryptosporidium
• 100% removal of cysts
• Chlorine reduction (>95% gravity/>50% pressure)
• Organics reduction (>95% gravity/>50% pressure)

Filter Type: Sintered Ceramic

Filter Life: 6 months or 535 gallons

Micron Rating: 0.9 microns

Flow Rate: 1.2 gallons per minute

Country of Origin: United Kingdom (GB)

• Manufacturer: Doulton W9121202

• Doulton Ceramic Candle Water Filter Cleaning Instructions:
• The ceramic shell of the water filter is designed to filter fine particles, bacteria and other contaminants from your water. In doing so, the outside of the ceramic shell can eventually need cleaning which will become evident when water flow from the filter becomes reduced. When this occurs, simply remove, clean and replace the cartridge as follows:
• 1st: Wash your hands with filtered water.
• 2nd: Remove the ceramic cartridge according to the instructions of your particular filter housing (Handle with care. Wet cartridges are fragile!)
• 3rd: Take a clean scouring pad, or slightly abrasive cloth, and give the ceramic a light scrub under running water. Apply gentle pressure uniformly, take care that the cleaning of the ceramic is not concentrated in one area. This will remove surface particles from the water filter as well as an outer layer of ceramic, restoring and refreshing the water filter to it's original water flow.
• 4th: Replace cartridge in filter housing.
• 5th: Wash hands thoroughly after handling the ceramic cartridge.
• Important: Care must be taken at all times to prevent contamination of the end of the cartridge mount from unfiltered water and/or dirty hands from cleaning the cartridge surface. You may wish to cover the end with a plastic bag and rubberband to make handling easier. Do not use soap or detergents.
• Cleaning can be done over 50 times before replacement of the water filter cartridge will be necessary.