 Larger View
|
|
- Everpure 7-DM Replacement Demineralizing Water Filter Features:
- The Everpure 7-DM demineralizing water filter is for water with high mineral content.
- The Everpure 7-DM EV960701 replacement water filter cartridge removes total dissolved solids (TDS) by using a mix of cation and anion resin.
- The Everpure 7-DM Steamer Demineralization Cartridge is especially useful on low capacity flash steamers and warmers that are not emptied each day.
- The Everpure 7DM EV9607-01 reduces limescale build-up that can cause excessive machine downtime and increased
maintenance costs. Scale reduction also reduces energy costs.
- The Everpure 7-DM's sanitary cartridge replacement is simple, quick and clean. Internal filter parts are never exposed to handling or contamination.
- Everpure 7-DM Water Filter Cartridge EV9607-01 Specs:
- Overall Dimensions: 20.75” H x 3.25” Diameter
- Maximum Flow Rate: 0.5 GPM
- Temperature Range: 35 - 100ºF (2 - 38ºC)
- Pressure Requirements: 10-125 psi(0.7-8.6 bar) non-shock
- Capacity: 1,600 grains or 103,000 ppm
- Contents: Acid cation and base anion
exchange resin
- Everpure 7-DM Demineralization Cartridge Instructions:
- Install vertically with cartridge hanging down.
- Allow 2 1/2” clearance below the cartridge for easy
cartridge replacement.
- Use plastic tubing after DM cartridge.
- Flush the Everpure 7DM cartridge by running water through the filter for 3 minutes at full flow.
- Always flush the filter cartridge at time of
installation and cartridge change.
- Change filter cartridges on a regular 6 month
preventative maintenance program.
- Change cartridges when capacity is reached or
when pressure falls below 10 psi.
- Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
- To determine Everpure 7-DM cartridge life, divide total capacity of cartridge (1,600 grains or 103,000 mg) by the TDS in grains per gallon (gpg) or milligrams per liter (ppm), respectively.
|
Features
Ace Hardware
