Water Filter View Cart MY ACCOUNT  |  BOOKMARK  |  REORDER  |  ORDER STATUS  |  Water Filter View Cart HELP  |  Water Filter View Cart CART
Water Filters Free Shipping HACKER SAFE certified sites prevent over 99.9% of hacker crime.
Water Filters made EASY at
Easy to find water filters and replacement water filters including Culligan whole house water filtration systems and under sink reverse osmosis filters

Water Filters Home > Everpure Water Filters > Everpure E-10 Water Filter System


Everpure E-10 EV9795-80 Sediment Prefilter

12.44” H x 5.16 ”W x 5.5” D

Everpure E-10 EV9795-80 Sediment Prefilter Water Filter
Water Filters Larger ViewLarger View

 Product Code: E-10
 
  • Everpure E-10 EV9795-80 Sediment Water Filter Features:
  • The Everpure E-10 water filters filter out larger dirt and rust particles.
  • By using a whole house prefilter, you can extend the life of your Everpure drinking water filter cartridges. If your drinking water fliters are filling up too quickly, the sediment pre-filter will help preserve the life of the more expensive drinking water filters.
  • Tightly spun Everpure EC110 sediment cartridge delivers 10 micron nominal filtration.
  • Durable slim bowl design makes cartridge change outs easy to handle.
  • Clear housing lets you visually inspect trapped particles and makes determining when to change the cartridge easy.
  • 10" bowl design accepts most 10" drop in cartridges.
  • Everpure E-10 EV9795-80 Sediment Prefilter Specs:
  • Maximum Flow Rate:6.0 gpm
  • Maximum Temperature:35 - 100°F (2 - 38°C)
  • Maximum Pressure:10 - 125 psi (0.7 – 8.6 bar), non-shock
  • Inlet connection: 3/4”
  • Outlet connection: 3/4”
  • Everpure E-10 EV9795-80 Sediment Prefilter Replacements:
  • Everpure E-10 EV9795-80 Water Filter Systems use the Everpure EC-110 Replacement Cartridge. The Pentek P1 can be used in place of the Everpure EC-110.
  • The Everpure EC-10 is the replacement system for the older Everpure K-10 Model # EV9795-51.
  • Everpure E-10 EV9795-80 Sediment Water Filter Instructions:
  • Inspect Everpure EC-110 cartridge periodically to determine dirt load.
  • Replace Everpure EC-110 cartridge when dirt has penetrated through to the inner core of the cartridge.
  • Do not exceed service flow rate.
  • Inspect O-ring during each cartridge change.
  • Lubricate and/or replace o-ring if necessary.
  • Everpure E-10 EV9795-80 Sediment Prefilter Installation Tips:
  • Choose a mounting location suitable to support the full weight of the system when operating.
  • Make sure to properly lubricate O-ring prior to use.
  • Use 3/4” water line.
  • Install vertically with bowl hanging down.
  • Allow 2-1/2” clearance below the cartridge for easy cartridge replacement.

We no longer sell the Everpure E-10 Whole House System because the comparable Culligan HF-360 has the same qualities and costs half as much. Purchase the Culligan HF-360 whole house system below.

We no longer sell the Everpure EC110 replacement filters because the comparable Pentek P1 replacement filter has the same qualities and costs less. Purchase the Pentek P1 1 micron filter below. The P1 filter is a 10" L x 2.5 W replacement sediment filter.

 Replacement Filters and Parts
Culligan HF-360 Whole House Water Filter System Culligan HF-360 Whole House Water Filter System
Pentek P1 Sediment Water Filters Pentek P1 Sediment Water Filters
Add to Cart


Water Filters Email Friend