Everpure SS-10 EV9799-02 Scalestick Filter Cartridge

• Everpure SS-10 Scalestick Cartridge Features:
• The Everpure SS-10 filter inhibits mineral scale deposits and provides corrosion protection in water-fed equipment.
• The Everpure SS-10 features Hydroblend compound, a unique blend that inhibits mineral scale deposits and provides corrosion protection in low flow waterfed equipment.
• The Everpure SS-10 Scalestick patented design dispenses a controlled amount of Hydroblend for longterm protection and provides greater effectiveness than standard phosphate treatments.
• The Everpure SS-10 is unaffected by high temperatures, permitting a wide variety of applications.
• The Everpure SS-10 filter prevents limescale build-up while providing corrosion protection for steamers, combi-ovens, coffee machines, ice machines, proofers and insta-hot water dispensers.
• The Everpure SS-10 translucent filter cartridge allows simple visual monitoring of product usage and ensures against wasteful premature cartridge replacement.
• Integral feed cartridge fits most standard 10 inch housings.

Contaminant Removal:

• Mineral Scale Deposits

• Everpure SS-10 Scalestick Cartridge Specs:
• Dimensions: 10.06” H x 1.31” Diameter
• Service Flow Rate: 0.1-6 gpm
• Maximum Temperature: 150°F
• Capacity: Approximately 6 months. Capacity will vary depending on application and water usage. On flow rates less than 1 gpm, capacities may be reduced.
• Media: Hydroblend

• Manufacturer: Everpure EV979902

• Everpure SS-10 EV9799-02 Scalestick Housings:
• The Everpure SS-10 Scalestick filter fits standard 10" Housings.
• The Everpure SS-10 Scalestick filter fits Model A-10 Clear Housing (EV9100-01). This housing is used for temperatures less than 125°F.
• The Everpure SS-10 filter fits all current SR-X housings and all existing old style AR-X housings.
• If inlet feed water temperature is above 125°F, a hot water housing must be used.
• Housing not included.

• Everpure SS-10 EV9799-02 Scalestick Instructions:
• The Everpure SS-10 scalestick should be inspected every 6 months.
• Replace the SS-10 ScaleStick cartridge before Hydroblend compound is completely dissolved.
• Deliming of equipment prior to application is recommended, but not required.
• Pre-existing equipment scale may come loose and clog equipment. Remove any loose scale to assure satisfactory operation.
• Install vertically with black O-band seal up.
• The Everpure SS-10 ScaleStick cartridge cannot be installed into filter wraps.
• Flushing is not required for ScaleStick cartridges.
• If inlet feed water temperature is above 125°F, a hot water housing must be used.