Everpure SS-IMF Scalestick EV9799-32 Replacement Cartridge

• Everpure SS-IMF Scalestick EV9799-32 Cartridge Features:
• Everpure SSIMF Scalestick inhibits mineral scale deposits and prevents corrosion in water-fed equipment such as ice machines and ice applications.
• The Everpure SS-IMF cartridge features Hydroblend™ compound, a unique blend that inhibits mineral scale deposits and provides corrosion protection in low flow waterfed equipment.
• The Everpure SS-IMF Scalestick has a patented design (patent no. 5,580,448) which dispenses a controlled amount of Hydroblend™ for longterm protection and provides greater effectiveness than standard phosphate treatments.
• The Everpure SS-IMF's translucent cartridge allows simple visual monitoring of product usage and ensures against wasteful premature cartridge replacement.
• The SS-IMF integral feed cartridge fits Everpure model IMF housings.
• SS-IMF fits all old style 8" IMF Housings.

• Everpure SS-IMF Scalestick EV9799-32 Cartridge Specs:
• Overall Dimensions: 8.31”H x 1.31” Diameter
• Service Flow Rate: 0.1 - 6 gpm
• Note: On flow rates less than 1 gpm, capacities may be reduced.
• Maximum Temperature: 150°F
• Note: If inlet feed water temperature is above 125°F a hot water housing must be used.
• Capacity: Approximately 6 months
• Note: Capacity will vary depending on application and water usage.
• Note: *Not performance tested or certified by NSF.

• Manufacturer: Everpure SS-IMF

The SS-IMF is also known by the following part numbers:

• EV9799-32, EV979932, SS-IMF, SSIMF

• Everpure SS-IMF Scalestick EV9799-32 Cartridge Instructions:
• Install vertically with black O-band seal up.
• The SS-IMF may have a very tight fit into older style AR-9 heads. To facilitate installation, warm the top of the SS-IMF (with O-band seal still installed) by running it under hot water for 10 seconds and/or applying a small amount of food grade silicone lubricant to the inside of the O-band.
• Flushing is not required for ScaleStick cartridges.
• Deliming of equipment prior to application is recommended, but not required.
• Pre-existing equipment scale may come loose and clog equipment. Remove any loose scale to assure satisfactory operation.
• Inspect ScaleStick cartridges at least every 6 months.
• Replace ScaleStick before Hydroblend compound is completely dissolved.
• May use spacer (EV3114-69) for adapting SSIMF to 10" bowl.