The FloJet 4300-043 pump is perfect for moving your wine around quickly and efficiently. It is self priming for easy starting. It is not made to handle high temperatures.
The Flojet 4300-043 high flow pump is also great for car / auto / boat detailing or other applications. Can be mounted to tank for true portable water source.
Handles Water-Like and Viscous Liquids up to 250 cP
Built-in pressure switch automatically starts and stops pump instantaneously when discharge valve opens and closes
Compact design and plug-in port fitting make installation easy.
Can run dry without damage and handle liquids up to 130 F (54 C).
No metal contact with liquid being pumped.
Ball bearing drive throughout pump and motor assures longer pump life.
Excellent self-priming capability. Pump may be located above the liquid level.
Powerful, permanent magnet motor with low current draw and long life brushes.
Industrial QUAD pump - Developed to deliver higher flows up to 5 GPM using a four piston design with excellent self-priming capability. Built-in pressure switch automatically starts and stops pump at its 45 PSI setting.
Santoprene diaphragm is an EPDM based thermoplastic elastomer and is resistant to mild acids, some solvents and bases.
Four-piston design delivers higher flow rates
Chemical-resistant polypropylene pump head for long life
Comes with pressure switch control to run the pump only as needed.
The Flojet 4300-043 high flow pump does not come with a cord. This gives you the choice of hard-wiring the pump into a system or adding a plug to the system.
Flojet 4300-043A High Flow Booster Pump:
Pump Body: Polypropylene
Check Valve: EPDM
Flow Rate: 4.8 US Gallons/Min (17 Litres/Min)
Max. Pressure: 45 psi (3.2 bar)
Port Size: 3/4" Hose
Motor / Amp Draw: 115 VAC , Amps : 1.5 amp
Pressure Switch Setting: 30psi (2.1 bar) Cut In, 45psi (3.2 Bar) Cut Out
Manufacturer: Flojet 4300-043A
The 4300-043A is also known by the following part numbers: