| | | |

Water Filters made EASY at

Easy to find water filters and replacement water filters including Culligan whole house water filtration systems and under sink reverse osmosis filters

WATER FILTER FINDER^TM in 0 item(s) in cart / TOTAL: $0.00 View Cart

| | | | |
| | | |

Home > Water Filter Brands > Desal GE Reverse Osmosis Membranes > Desal Commercial RO Membranes > AK3218T

GE Desal AK3218T Ametek 20" RO Membrane

460 Gallons Per Day; 3.2" x 18" TFC; Part # 1206803; 20" Ametek

Larger View

GE Desal AK3218T Ametek Reverse Osmosis Element TFC:
The GE Desal AK3218T Ametek reverse osmosis elements are used for brackish water desalination.
The Desal AK3218T RO element is tape wrapped.
The A-Series thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.
GE Osmonics Desal AK3218T High Rejection Brackish Water reverse osmosis elements feature a tape outerwrap and 28 mil feed spacers and is designed with flush end connections.
GE Desal AK High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 100 psig are desired.
These elements allow significant energy savings.
The GE Desal AK3218T is designed to replace a 20" Ametek element by fitting into an Ametek housing that has been equipped with a brine control valve.

GE Desal AK3218T RO Element Specs:
460 Gallons Per Day
Dimensions: 3.2" W X 18" L

Membrane: Thin Film Membrane

Typical Operating Pressure: 100 psig

Maximum Pressure: 400 psig

Maximum Temperature: 122°F (50°C)

Chlorine Tolerance: 1,000 ppm-hrs, dechlorination recommended

Optimum Rejection pH: 7.0 -7.5

Operating pH Range: 4.0 - 11.0

Cleaning pH Range: 2.0 - 11.5

Feed NTU: <1

Feed SDI: <3

Average Rejection: 99%

Minimum Rejection: 98%

Typical Operating Flux: 10-20 GFD (15-35) L.H-1.M-2