- GE Merlin Reverse Osmosis Post Filter 1244746:
- The GE Merlin Carbon Post Filter 1244746 is a granular activated carbon filter. It is the final filtering stage in the GE Merlin RO System.
- The GE Merlin RO System Post Filter is an inline filter that provides a final polish your purified drinking water.
- The GE Merlin Tankless RO System Carbon PostFilter should be changed approximately every 6 months depending on your water quality and water usage.
The 1244746 has been discontinued by the manufacturer. Please purchase the compatible, replacement GS-10RO-H-38, available below. The GS-10RO-H-38 is 10" x 2" and uses the inline filter clip CLP-20W available below.
- GE Merlin Reverse Osmosis Post Filter Specs:
- Dimensions: 10.5" L x 2.6" W
- Flow Rate: .75 Gallons Per Minute
- Filter Change Frequency: 6 Months
- Manufacturer: GE Osmonics 1244746
- Use the GE Merlin 1244746 Carbon PostFilter With:
- Use with GE Merlin Reverse Osmosis System Housing Stage 4
- GE Merlin RO System Replacement Parts:
- Housing Sump O-Rings: The GE Merlin 1240326 Housing Sump O-Rings should be replaced every couple of filter changes or when there is damage to the o-ring. Use o-ring lubricant to keep the oring effective at sealing the housing sumps.
- Reverse Osmosis System Recommended Care:
- Change your filters and membrane at the recommended frequency, and clean your system with a product like Sani-System SS96RO, an easy to use, pre-measured, reverse osmosis system sanitizer, available below.
Larger View
Features
