| | | |

Water Filters made EASY at

WATER FILTER FINDER^TM in 0 item(s) in cart / TOTAL: $0.00 View Cart

| | | | |
| | | |

O-Ring Silicone Grease (0.1 oz / 3 grams)

Use on all brands of Water Filter Housing O-Rings

ORing Silicone Grease:
GE WS60X10005 Food-Grade Silicone Grease.
The o-ring sealant package contains 0.1 oz / 3 grams.
Use this ORing Silicone Grease on all brands of Water Filter Housing O-Rings and all Reverse Osmosis System O-Rings.
O-Ring lubricant prevents leaks and improves sealing of the o-ring.
Should I use a lubricant on my O-Ring?
If you choose to reuse your water filter housing o-rings, you should use a lubricant on them to keep them effective. You should only use a special silicone lubricant.
Do I need to lubricate the gasket on the filter cartridge?
Generally, no because each replacement filter cartridge comes with its own new gasket if one is needed. The rubber gasket is the top or bottom part of the replacement filter cartridge and is not the same as the oring.

ORing Silicone Lubricant Instructions:
First, wipe your old O-Ring clean. Then wipe the groove in the filter housing clean. Finally, apply enough lubricant on the O-Ring to give it a gloss. The ORing is ready to place back in the housing.
If the O-Ring is bent, crimped, or showing signs of wear, you should replace the oring.