HM Digital CIC-152 Dosing/Injection EC/TDS Controller with Digital Calibration

• HM Digital CIC-152 Dosing/Injection EC/TDS Controller with Digital Calibration:
• HM Digital CIC-152 TDS/EC Controller monitors and controls dosing or injection systems.
• It comes with a large, bright L.E.D. display.
• The CIC-152 Controller has two adjustable set points to keep TDS / EC levels withinthe minimum and maximum range.
• The CIC-152 Dosing/Injection TDS/EC Controller minimum and maximum control points will activate relay controls via switching dry contacts.
• The CIC-152 can control two different devices (i.e., a pump and a valve).
• HM Digital CIC-152 Controller has two alarms(minimum and maximum levels) that can be set independently of the controlpoints.
• The CIC-152 offers digital calibration.
• The controller has on-screen range & control indicator lights (green, yellow or red).
• The CIC-152 installs easily in minutes.
• The CIC-152 HM DigitalController includes one sensor probe.
• A protective cover is also available forthe HM Digital CIC-152 TDS/EC Controller which protect it from dust and water (sold separately).
• The HM Digital CIC-152 Controller is available with the NaCl conversion factor (model CIC-152) or the 442TM conversion factor (model CIC-152-4).

• HM Digital CIC-152 Dosing/Injection TDS/EC Controller Specs:
• TDS Range: 0 - 5000 ppm
• EC Range: 0-9999 µS
• Temperature Range: 1-80°C; 33-176°F
• Accuracy: ±2% (of the reading)
• Resolution: 0.1 ppm (0-999); 1 ppm (1000-9999)
• ATC: Yes (1 -80°C)
• Calibration: Digital (by push button)
• Factory Calibration: 1413µS
• Set-Point: Adjustable by push button. Control Point 2: Maximum TDS Limit. Control Point 1: Lower TDS Level.
• Relay Control: The unit will transmit an analog signal (simple switch) via open or closed contacts to a device (e.g. pump/valve) when the ppm/µS level reaches the maximum TDS/EC limit (Control Point 2) or the minimum TDS/EC limit (Control Point 1). The contacts are switched back to the normal position once the TDS returns to the acceptable range.
• Relay Voltage: 5V(attached devices must have their own power supply)
• Alarm: Two independent alarms (set by user)
• Display: Bright 5/8" L.E.D. display
• Probe: 1/2" bushing, 3 meter (9.8 ft) shielded cable (model SP-1-PSC)
• Power supply: AC 110V / AC 220V
• Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.)
• Monitor Weight: 476 g (1 lb .8 oz)
• Total Weight: 680.4 g (1 lb 8 oz)

• Manufacturer: HM Digital CIC-152

The CIC-152 is also known by the following part numbers:

• CIC-152, CIC152