HM Digital PS-100 Panel Mount TDS Controller for Commercial Systems

• HM Digital PS-100 Panel Mount Controller to Monitor and Control TDS:
• The Panel Mount Controller monitors and controls Total Dissolved Solids levels for high output commercial systems.
• This PS-100 Controller has a large, bright LED display.
• An alarm will sound if the TDS level rises above the user-set level.
• The PS-100 installs easily in minutes.
• The PS-100 controller includes one sensor probe (at no extra cost).
• A protective cover, the CC-1, is also available. The CC-1 is sold separately and available below.

• HM Digital PS-100 Panel Mount Commercial Systems TDS Controller Specs:
• Range: 0 - 999ppm.
• Accuracy: ±2%.
• Conversion Factor: NaCl (avg. 0.5).
• Resolution: 1 PPM.
• ATC: Yes (1 - 65 degrees Celsius).
• Calibration: Adjustable (manual).
• Setting: Controlled by on-screen up and down buttons.
• Relay Control: The unit will open or close a circuit via dry contacts when the ppm level reaches or exceeds the control setting (simple switch). It can be used to control a pump or other device.
• Relay Voltage: 5V.
• Alarm: Optional steady beep (set by user).
• Display: Bright 5/8" LED display.
• Probe: 0.5" bushing, 9.8 ft (3 meter) shielded cable.
• Power supply: AC 110V / AC 220V.
• Dimensions: 2.8" H x 2.8" W x 4" D.
• Monitor Weight: 1lbs 0.8 oz.
• Total Weight: 1lbs 8 oz.

• Manufacturer: HM Digital PS-100

The PS-100 is also known by the following part numbers:

• 200877, HMPS-100, PS-100, PS100