The Hydrotech 4VTFC9G-PB Reverse Osmosis System is a 4-Stage RO system which combines mechanical filtration with reverse osmosis technology for effective Water Filtration treatment in point-of-use applications.
We distribute water filters for the Hydrotech 4VTFC9G-PB Reverse Osmosis Drinking Water Filtration System.
The Hydrotech 4VTFC9GPB Reverse Osmosis System features a thin film composite membrane, a dual purpose sediment and activated pre-carbon filter, activated post-carbon filter, automatic shut-off, chrome standard faucet and a storage tank.
Hydrotech Reverse Osmosis Systems include 3/8” outlet tubing to the faucet for higher flows, quick connect fittings and color-coded tubing for easy installation and servicing.
The Hydrotech 4VTFC9G-PB Reverse Osmosis System can be neatly stored under the counter and provides you with clean, delicious Water Filtration right from its own dedicated tap.
Hydrotech 4VTFC9G-PB Series Reverse Osmosis Systems use the Pushbutton Smartap Water Quality Monitor to accurately indicate membrane performance.
Hydrotech Part number 12303000-01 and 1240300-00. Also known as system 12303 and system 12403.
Manufacturer: Hydrotech 4VTFC9G-PB
Hydrotech 4V-TFC-9G-PB Reverse Osmosis System Stages:
Stage 1: The 41400008 / S-FS-02 is a Sediment Filter used in the first housing. The Stage 1 filter should be changed every 3-6 months.
Stage 2: The 41400009 / S-FS-19 Carbon Block Filter is used in the 2nd stage. The Stage 2 filter should be changed every 6-12 months.
Stage 3: The 33001071 / S-FS-17 9 GPD Membrane is used in the 3rd stage. The Stage 3 membrane should be changed approximately every 2 years.
Stage 4: The 41400009 / S-FS-19 Carbon Block Filter is used in the 4th stage. The Stage 4 filter should be changed every 6-12 months.
Hydrotech 4V TFC9G-PB RO System Parts:
Replacement O-Ring: The 34201026 O-Ring is a replacement o-ring that fits inside the housing sumps. The o-rings should be replaced every couple of filter changes. Be sure to use O-Ring Silicone Grease to lubricate the o-rings every time you change the filters.
Replacement Sump: The 20500023 Sump is a replacement sump and only needs to be replaced when your sump cracks or wears out.
Wrench: The 21401003 Wrench is a great tool for removing the sump when replacing the filters. DO NOT use the wrench to tighten the sump.
The filter change interval will vary due to your water quality and the amount of water used.
Hydrotech 4V TFC 9G PB Instructions:
The Hydrotech 4VTFC9GPB also comes with an owner's manual and installation guide. Filters should be replaced every 6 months to 1 year depending on usage and membrane should be replaced every 2 to 5 years.