 Larger View
More Images
|
|
- Liquatec IAC-10 Inline Coconut Carbon Water Filters:
- The Liquatec IAC-10 Inline Coconut Carbon filter belongs to the IA-Series inline filter series and has 1/4" FPT connections.
- The Liquatec IAC-10 Inline Coconut Carbon water filter reduces taste, odor, sediment, and Chlorine taste and odor.
- Designed for quick and simple installation with 1/4" FPT fittings on 1/4" water line. The 1/4" fittings are sold separately or use your current 1/4" fittings.
- The Liquatec IAC-10 filter is a coconut shell granular activated carbon (GAC) Inline Filter.
- For use in beverage equipment, Reverse Osmosis systems, drinking fountains, water coolers, ice machines, refrigerators, coffee makers and other point of use applications.
- Try our WaterFilters.NET Inline Filter for Less:
- WaterFilters.NET IC10-14C-WF Inline Water Filter
- Liquatec IAC-10 GAC Inline Coconut Carbon Filter Contaminant Reduction:
- Degree of Nominal Filtration: 5 Microns
- Chlorine Taste & Odor Reduction: Class 1
- Liquatec IAC-10 Coconut Carbon Inline Water Filter Specs:
- Filter size: 2" W x 10" L
- Max Pressure: 125 psi
- Max Temperature: 100ºF (38ºC)
- Minimum Temperature: 35ºF (2ºC)
- Flow Rate: .5 gpm
- Filter Life: 1 year or 2000 gallons
- Pipe Size NPT: 1/4"
- Liquatec IAC-10 Inline Water Filters have been tested for performance under NSF Standard 42.
- Liquatec IAC-10 Filter Replacement Information:
- The Liquatec IAC-10 inline filters should be replaced every 2000 gallons or 1 year depending on the quality of your water.
- The Liquatec IA-Series IAC-10 1/4" inline filter can be used in many RO systems as well as icemakers, coffee makers and refrigerators.
- Compatible Replacement Filter for the Liquatec IAC-10 Water Filter:
- Aqua Fresh WF271 Inline Water Filter
- Try our WaterFilters.NET Inline Filter for Less:
- WaterFilters.NET IC10-14C-WF Inline Water Filter
- Liquatec IAC-10 Coconut Carbon Inline Water Filter Instructions:
- Liquatec IAC-10 water filters should be installed on cold water lines only.
- Liquatec IAC-10 water filters should not be used where water is microbiologically unsafe.
- Cartridges will contain a very small amount of carbon fines, after installation, cartridges should be flushed with sufficient water to remove all traces of fines from your
water system before use. It is recommended that you run the tap for at least 10 seconds prior to using the water. This is particularly important if the tap water has not been used daily.
- The filter must be protected against freezing. Failure to do so may result in cracking of the filter and water leakage.
|
Features
Ace Hardware
