| | | |

Water Filters made EASY at

WATER FILTER FINDER^TM in 0 item(s) in cart / TOTAL: $0.00 View Cart

| | | | |
| | | |

Liquatec IAC-2512 Inline Coconut Carbon Filter

2.5" W x 12" L; 1/4" FPT; Coconut Granular Activated Carbon

Larger View

Liquatec IAC-2512 Inline Coconut Carbon Water Filters:
The Liquatec IAC-2512 Inline Coconut Carbon filter belongs to the IA-Series inline filters and has 1/4" FPT connections.
The Liquatec IAC-2512 Inline Coconut Carbon water filter reduces taste, odor, sediment, and Chlorine taste and odor.
Designed for quick and simple installation with 1/4" FPT fittings on 1/4" water line. Purchase the 1/4" FPT fittings separately or use your existing 1/4" FPT fittings.
The Liquatec IAC-2512 filter is a coconut shell granular activated carbon (GAC) Inline Filter.
For use in beverage equipment, Reverse Osmosis systems, drinking fountains, water coolers, ice machines, refrigerators, coffee makers and other point of use applications.

Liquatec IAC-2512 Filter Replacement Information:
The Liquatec IAC-2512 inline filters should be replaced every 3500 gallons or 1 year depending on the quality of your water.
The Liquatec IA-Series IAC-2512 1/4" inline filter can be used in many RO systems as well as icemakers, coffee makers and refrigerators.

Liquatec IAC-2512 Coconut Carbon Inline Water Filter Instructions:
Liquatec IAC-2512 water filters should be installed on cold water lines only.
Liquatec IAC-2512 water filters should not be used where water is microbiologically unsafe.
Cartridges will contain a very small amount of carbon fines, after installation, cartridges should be flushed with sufficient water to remove all traces of fines from your water system before use. It is recommended that you run the tap for at least 10 seconds prior to using the water. This is particularly important if the tap water has not been used daily.
The filter must be protected against freezing. Failure to do so may result in cracking of the filter and water leakage.