| | | |

Water Filters made EASY at

WATER FILTER FINDER^TM in 0 item(s) in cart / TOTAL: $0.00 View Cart

| | | | |
| | | |

Omnipure Q5315 Carbon Block Lead Water Filter

2 1/2" W x 6" L; 1 Micron, Chlorine Taste & Odor, Cyst, Lead Reduction

Larger View

Omnipure Q5315 Q-Series Water Filter:
The Omnipure Q5315 is a 1 Micron Carbon Block Lead Reduction Water Filter.
The Omnipure Q5315 Carbon Block Lead water filter is very "user friendly".
Replacement of the spent media bed is done quickly by detaching the filter body from a permanent head with a twist of the wrist.
The new Q5315 filter body is just as easily threaded into the head and the replacement is then complete.
The Omnipure Q5315 is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head.
The Omnipure Q5315 can be used as a pre or post filter for reverse osmosis systems, beverage equipment, drinking water fountains, ice machines, and other point of use applications.
The Omnipure Q5315 GAC lead water filter is a block granular activated carbon filter used to reduce cysts, lead, taste, odor and chlorine taste and odor.

Omnipure Q5315 Q-Series Water Filter Specs:
Dimensions: 2.5" W X 6" L
Rating: 1 Micron Rating
Flow Rate: .5 GPM
Maximum Pressure: 125 PSIG
Maximum Temperature: 100 F
Service Life: 1 Year or 750 Gallons
Filtration Media: Carbon Block with Lead Specific Media
Reduces: Chlorine Taste & Odor
Reduces: Cysts (Cryptosporidium & Giardia)
Reduces: Lead
Fitting Size: This Q-Series filter is a replacement filter and must be used with an existing Q-Series head. The Q-Series heads are available in 1/4" Quick-Connect fittings, 1/4" NPT female threads, or 3/8" NPT female threads.

Omnipure Q5315 Q-Series Water Filters are designed to fit:
Omnipure Twist Tap filter heads QNVH B, C, or J, with or without automatic shutoff.
If you do not have a head for the Omnipure Q-Series filters, you can purchase one of the Omnipure Q-Series heads below in the Related Products section. These heads are valved which means the water will automatically shut off when replacing the Q-Series water filter. The heads are available with 1/4" quick connect fittings, 1/4" NPT, or 3/8" NPT.

Omnipure Q5315 Q-Series Water Filter Instructions:
Omnipure Q5315 water filters should be installed on cold water lines only.
Omnipure Q5315 water filters should not be used where the water is microbiologically unsafe.

Product Code: Q5315

Reminder