| | | |

Water Filters made EASY at

WATER FILTER FINDER^TM in 0 item(s) in cart / TOTAL: $0.00 View Cart

| | | | |
| | | |

Omnipure Q5320 Carbon Block Water Filters

2 1/2" W x 6" L; 1 Micron, Chlorine Taste & Odor, Cyst, Sediment Filter

Omnipure Q5320 Q-Series Carbon Block Water Filter:
The Omnipure Q5320 Block GAC filter is very "user friendly".
Replacement of the spent media bed is done quickly by detaching the filter body from a permanent head with a twist of the wrist.
The new Q5320 filter body is just as easily threaded into the head and the replacement is then complete.
The Omnipure Q5320 is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head.
The Omnipure Q5320 Water Filter can be used in ice makers, refrigerators, beverage equipment, drinking fountains, under the sink systems, and reverse osmosis systems.
The Omnipure Q5320 GAC water filter is a block granular activated carbon filter used to reduce cysts, sediment, taste, odor and chlorine taste and odor.

Omnipure Q5320 Carbon Block Water Filter Specs:
Dimensions: 2.5" W X 6" L
Rating: 1 Micron Rating
Flow Rate: .5 GPM
Maximum Pressure: 125 PSIG
Maximum Temperature: 100 F
Minimum Temperature: 35 F
Service Life: 1 Year or 1500 Gallons
Filtration Media: Carbon Block
Reduces: Chlorine Taste & Odor
Reduces: Cysts (Cryptosporidium & Giardia)
Reduces: Particulates Class 1
Fitting Size: This Q-Series filter is a replacement filter and must be used with an existing Q-Series head. The Q-Series heads are available in 1/4" Quick-Connect fittings, 1/4" NPT female threads, or 3/8" NPT female threads.
Omnipure Q5320 has been tested for performance under NSF Standard 42.

Omnipure Q5320 1 Micron Carbon Block Water Filters are designed to fit:
Omnipure Twist Tap filter heads QNVH B, C, or J, with or without automatic shutoff.
If you do not have a head for the Omnipure Q-Series filters, you can purchase one of the Omnipure Q-Series heads below in the Related Products section. These heads are valved which means the water will automatically shut off when replacing the Q-Series water filter. The heads are available with 1/4" quick connect fittings, 1/4" NPT, or 3/8" NPT.

Omnipure Q5320 Block GAC Water Filter Instructions:
Omnipure Q5320 water filters should be installed on cold water lines only.
Omnipure Q5320 water filters should not be used where the water is microbiologically unsafe.

Product Code: Q5320

Reminder