| | | |

Water Filters made EASY at

WATER FILTER FINDER^TM in 0 item(s) in cart / TOTAL: $0.00 View Cart

| | | | |
| | | |

Omnipure Q5386 Q-Series GAC & Phosphate Water Filter

2 1/2" W x 6" L; Chlorine Taste & Odor Reduction, Scale Inhibitor

Omnipure Q5386 GAC & Phosphate Water Filter:
The Omnipure Q5386 GAC and polyphosphate water filter is very "user friendly".
Replacement of the spent media bed is done quickly by detaching the filter body from a permanent head with a twist of the wrist.
The new Q5386 filter body is just as easily threaded into the head and the replacement is then complete.
The Omnipure Q5386 is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head.
The Omnipure Q5386 Water Filter can be used in ice makers, refrigerators, beverage equipment, drinking fountains, under the sink systems, and reverse osmosis systems.
The Omnipure Q5386 GAC/Phosphate water filter consists of granular activated carbon used to reduce taste, odor and chlorine taste and odor along with a polyphosphate scale inhibitor.

Omnipure Q5386 GAC & Phosphate Water Filter Specs:
Dimensions: 2.5" W X 6" L
Flow Rate: .5 GPM
Maximum Pressure: 125 PSIG
Maximum Temperature: 100 F
Service Life: 6 Months or 1000 Gallons
Filtration Media: Granulated Activated Carbon with Polyphosphate Scale Inhibitor
Reduces: Chlorine Taste & Odor
Reduces: Particulates Class 1
Reduces: Scale and Lime Scale
Volume Cubic Inch: 14.7
Fitting Size: This Q-Series filter is a replacement filter and must be used with an existing Q-Series head. The Q-Series heads are available in 1/4" Quick-Connect fittings, 1/4" NPT female threads, or 3/8" NPT female threads.

Omnipure Q5386 GAC & Phosphate Water Filters are designed to fit:
Omnipure Twist Tap filter heads QNVH B, C, or J, with or without automatic shutoff.
If you do not have a head for the Omnipure Q-Series filters, you can purchase one of the Omnipure Q-Series heads below in the Related Products section. These heads are valved which means the water will automatically shut off when replacing the Q-Series water filter. The heads are available with 1/4" quick connect fittings, 1/4" NPT, or 3/8" NPT.

Omnipure Q5386 GAC & Phosphate Water Filter Instructions:
Omnipure Q5386 water filters should be installed on cold water lines only.
Omnipure Q5386 water filters should not be used where the water is microbiologically unsafe.

Product Code: Q5386

Reminder