| | | |

Water Filters made EASY at

WATER FILTER FINDER^TM in 0 item(s) in cart / TOTAL: $0.00 View Cart

| | | | |
| | | |

Omnipure Q5520-P Phosphate Carbon Block Water Filter

2 1/2" W x 10" L; 1 Micron, Chlorine Taste & Odor, Cyst, Scale Reduction

Omnipure Q5520-P Q-Series Water Filter:
The Omnipure Q5520-P is a 1 Micron Carbon Block Water Filter with Phosphate Scale Inhibitor.
The Omnipure Q5520-P Carbon Block Scale Inhibitor water filter is very "user friendly".
Replacement of the spent media bed is done quickly by detaching the filter body from a permanent head with a twist of the wrist.
The new Q5520-P filter body is just as easily threaded into the head and the replacement is then complete.
The Omnipure Q5520-P is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head.
The Omnipure Q5520-P can be used as a pre or post filter for reverse osmosis systems, beverage equipment, drinking water fountains, ice machines, and other point of use applications.
The Omnipure Q5520-P GAC water filter is a block granular activated carbon filter with phosphate used to reduce cysts, scale, taste, odor and chlorine taste and odor.

Omnipure Q5520-P Q-Series Water Filter Specs:
Dimensions: 2.5" W X 10" L
Rating: 1 Micron Rating
Flow Rate: .5 GPM
Maximum Pressure: 125 PSIG
Maximum Temperature: 100 F
Service Life: 6 Months or 2000 Gallons
Filtration Media: Carbon Block with Polyphosphate
Reduces: Chlorine Taste & Odor
Reduces: Cysts (Cryptosporidium & Giardia)
Reduces: Scale
Fitting Size: This Q-Series filter is a replacement filter and must be used with an existing Q-Series head. The Q-Series heads are available in 1/4" Quick-Connect fittings, 1/4" NPT female threads, or 3/8" NPT female threads.

Omnipure Q5520-P Q-Series Water Filters are designed to fit:
Omnipure Twist Tap filter heads QNVH B, C, or J, with or without automatic shutoff.
If you do not have a head for the Omnipure Q-Series filters, you can purchase one of the Omnipure Q-Series heads below in the Related Products section. These heads are valved which means the water will automatically shut off when replacing the Q-Series water filter. The heads are available with 1/4" quick connect fittings, 1/4" NPT, or 3/8" NPT.

Omnipure Q5520-P Q-Series Water Filter Instructions:
Omnipure Q5520-P water filters should be installed on cold water lines only.
Omnipure Q5520-P water filters should not be used where the water is microbiologically unsafe.

Product Code: Q5520-P

Reminder