 Larger View
|
|
- Omnipure Q5586 GAC & Phosphate Water Filter:
- The Omnipure Q5586 GAC and polyphosphate water filter is very "user friendly".
- Replacement of the spent media bed is done quickly by detaching the filter body from a permanent head with a twist of the wrist.
- The new Q5586 filter body is just as easily threaded into the head and the replacement is then complete.
- The Omnipure Q5586 is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head.
- The Omnipure Q5586 Water Filter can be used in ice makers, refrigerators, beverage equipment, drinking fountains, under the sink systems, and reverse osmosis systems.
- The Omnipure Q5586 GAC/Phosphate water filter consists of granular activated carbon used to reduce taste, odor and chlorine taste and odor along with a polyphosphate scale inhibitor.
- Omnipure Q5586 GAC & Phosphate Water Filter Contaminant Reduction:
- Chlorine Taste & Odor Reduction: Class 1
- Scale Reduction
- Omnipure Q5586 GAC & Phosphate Water Filter Specs:
- Dimensions: 2.5" W X 10" L
- Flow Rate: .5 GPM
- Maximum Pressure: 125 PSIG
- Maximum Temperature: 100 F
- Service Life: 6 Months or 1500 Gallons
- Filtration Media: Granulated Activated Carbon with Polyphosphate Scale Inhibitor
- Reduces: Chlorine Taste & Odor
- Reduces: Particulates Class 1
- Reduces: Scale and Lime Scale
- Volume Cubic Inch: 28.6
- Fitting Size: This Q-Series filter is a replacement filter and must be used with an existing Q-Series head. The Q-Series heads are available in 1/4" Quick-Connect fittings, 1/4" NPT female threads, or 3/8" NPT female threads.
- Omnipure Q5586 GAC & Phosphate Water Filters are designed to fit:
- Omnipure Twist Tap filter heads QNVH B, C, or J, with or without automatic shutoff.
- If you do not have a head for the Omnipure Q-Series filters, you can purchase one of the Omnipure Q-Series heads below in the Related Products section. These heads are valved which means the water will automatically shut off when replacing the Q-Series water filter. The heads are available with 1/4" quick connect fittings, 1/4" NPT, or 3/8" NPT.
- Omnipure Q5586 GAC & Phosphate Water Filter Instructions:
- Omnipure Q5586 water filters should be installed on cold water lines only.
- Omnipure Q5586 water filters should not be used where the water is microbiologically unsafe.
|
Features
Ace Hardware
