 Larger View
|
|
- Omnipure Q5633 Water Filters:
- The Q-Series Omnipure Q5633 water filter is easy to install and user friendly.
- Designed for quick and simple installation with a twist of the wrist.
- The Omnipure Q5633 water filter is an acid washed granular activated carbon (GAC) 12x40 mesh filter.
- The Q-Series Q5633 filter improves drinking water and cooking water taste and odor.
- The Omnipure Q5633 replacement water filter can be used in beverage equipment, reverse osmosis systems, drinking fountains, ice machines, and other point of use applications.
- Omnipure Q5633 GAC Water Filter Contaminant Reduction:
- The Omnipure Q5633 reduces Taste & Odor, Chlorine Taste & Odor, and Particulates Class 1.
- Omnipure Q5633 Water Filter Specs:
- Filter Size: 2.5" W x 12" L
- Max Pressure: 125 psi
- Max Temperature: 100ºF (38ºC)
- Flow Rate: .5 GPM
- Filtration Media: Acid Washed Granulated Activated Carbon
- Volume Cubic Inch: 35.5
- Service Life: 1 Year or 2500 Gallons
- Fitting Size: This Q-Series filter is a replacement filter and must be used with an existing Q-Series head. The Q-Series heads are available in 1/4" Quick-Connect fittings, 1/4" NPT female threads, or 3/8" NPT female threads.
- Omnipure Q5633 Q-Series GAC Replacement Information:
- Easy change system provides a clean method to replace spent cartridges without any mess. Just turn off water & twist to remove filters and replace.
- The Omnipure Q5633 water filters should be replaced every 2500 gallons or 12 months depending on the quality of your water.
- The Omnipure Q5633 filter is used as a carbon filter in Stage 2 of the 4-Stage PuROTwist 4000 Reverse Osmosis System.
- The Q-Series Q5633 filter is also used as a postfilter in Stage 4 of the 4-Stage
PuROTwist 4000 Reverse Osmosis System.
- The Omnipure Q5633 is used as a carbon filter in Stage 2 of the 3-Stage
PuROTwist 3000 Reverse Osmosis System.
- Omnipure Twist Tap filter heads QNVH B, C, or J, with or without automatic shutoff.
- If you do not have a head for the Omnipure Q-Series filters, you can purchase one of the Omnipure Q-Series heads below in the Related Products section. These heads are valved which means the water will automatically shut off when replacing the Q-Series water filter. The heads are available with 1/4" quick connect fittings, 1/4" NPT, or 3/8" NPT.
|
Features
Ace Hardware
