 Larger View
|
|
- Omnipure Q5715 Q-Series Water Filter:
- The Omnipure Q5715 is a 1 Micron Carbon Block Lead Reduction Water Filter.
- The Omnipure Q5715 Carbon Block Lead water filter is very "user friendly".
- Replacement of the spent media bed is done quickly by detaching the filter body from a permanent head with a twist of the wrist.
- The new Q5715 filter body is just as easily threaded into the head and the replacement is then complete.
- The Omnipure Q5715 is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head.
- The Omnipure Q5715 can be used as a pre or post filter for reverse osmosis systems, beverage equipment, drinking water fountains, ice machines, and other point of use applications.
- The Omnipure Q5715 GAC lead water filter is a block granular activated carbon filter used to reduce cysts, lead, taste, odor and chlorine taste and odor.
- Omnipure Q5715 Q-Series Water Filter Contaminant Reduction:
- Chlorine Taste & Odor Reduction: Class 1
- Reduces: Cysts (Cryptosporidium & Giardia)
- Reduces: Lead
- Omnipure Q5715 Q-Series Water Filter Specs:
- Dimensions: 2.5" W X 14" L
- Rating: 1 Micron Rating
- Flow Rate: .5 GPM
- Maximum Pressure: 125 PSIG
- Maximum Temperature: 100 F
- Service Life: 1 Year or 2000 Gallons
- Filtration Media: Carbon Block with Lead Specific Media
- Reduces: Chlorine Taste & Odor
- Reduces: Cysts (Cryptosporidium & Giardia)
- Reduces: Lead
- Fitting Size: This Q-Series filter is a replacement filter and must be used with an existing Q-Series head. The Q-Series heads are available in 1/4" Quick-Connect fittings, 1/4" NPT female threads, or 3/8" NPT female threads.
- Omnipure Q5715 Q-Series Water Filters are designed to fit:
- Omnipure Twist Tap filter heads QNVH B, C, or J, with or without automatic shutoff.
- If you do not have a head for the Omnipure Q-Series filters, you can purchase one of the Omnipure Q-Series heads below in the Related Products section. These heads are valved which means the water will automatically shut off when replacing the Q-Series water filter. The heads are available with 1/4" quick connect fittings, 1/4" NPT, or 3/8" NPT.
- Omnipure Q5715 Q-Series Water Filter Instructions:
- Omnipure Q5715 water filters should be installed on cold water lines only.
- Omnipure Q5715 water filters should not be used where the water is microbiologically unsafe.
|
Features
Ace Hardware
