Omnipure SCL10-C GAC Phosphate Inline Water Filters:
Omnipure SCL10 2" x 10" GAC Phosphate Inline Filters come in three different inlet outlet sizes.
The Omnipure SCL10-C inline filter has a 3/8" FPT connection.
The Omnipure SCL-10-C Water Filter can be used in ice machines, water coolers, drinking fountains, under the sink systems, and reverse osmosis systems. You may also purchase fittings if your current fittings are worn out.
The Omnipure CL Series has been an industry standard for over 30 years.
The Omnipure SCL10C inline water filter utilizes a unique spring disc that keeps media under ideal pressure, eliminating channeling and ensuring an equal distance linear path.
The Omnipure SCL10-C inline filter has no glues or binders, that may cause contamination, used in the manufacturing process. Instead, components are friction-welded together, producing a reliable, no-leak seal.
The Omnipure SCL10-C inline filter has threaded connections which are precision cut by machine resulting in the most accurate and repeatable thread possible.
The Omnipure SCL10-C inline water filters contain granular activated carbon to reduce chlorine taste and odor and polyphosphate to control lime and scale deposits.
Omnipure SCL10-C GAC Inline Water Filter Contaminant Reduction:
Degree of Nominal Filtration: 10 microns
Chlorine Reduction Class: 1
Omnipure SCL10-C Inline Water Filters Specs:
Dimensions: 2" W X 10" L
Flow Rate: .5 GPM
Filter Life: 6 months or 1250 gallons
Maximum Pressure: 125 PSIG
Maximum Temperature: 100 F
Volume Cubic Inch: 16.6
Pipe Size NPT: 3/8"
Omnipure SCL10-C GAC Inline Water Filters have been tested for performance under NSF Standard 42.
Manufacturer: Omnipure SCL10-C
The SCL10-C is also known by the following part numbers:
Omnipure SCL10-C Inline Water Filter Instructions:
Omnipure SCL10-C water filters should be installed on cold water lines only.
Omnipure SCL10-C water filters should not be used where the water is microbiologically unsafe.