| | | |

Water Filters made EASY at

WATER FILTER FINDER^TM in 0 item(s) in cart / TOTAL: $0.00 View Cart

| | | | |
| | | |

Omnipure CL10ROT33-B Inline Water Filter

2" W x 10" L; 1/4" FPT; T33 Acid Wash Granular Activated Carbon

Larger View

Omnipure CL10ROT33-B Water Filters:
The Omnipure CL10ROT33-B belongs to the CL-Series inline filters and has 1/4" FPT connections.
The Omnipure CL10ROT33-B inline water filter reduces taste, odor & chlorine taste and odor.
Designed for quick and simple installation with 1/4" FPT fittings on 1/4" water line.
The Omnipure CL10ROT33-B filter is a granular activated carbon (GAC) Inline Filter.
For use in beverage equipment, Reverse Osmosis systems, drinking fountains, water coolers, ice machines, distillation units, and other point of use applications.

Omnipure CL10ROT33-B Water Filter Specs:
Filter size: 2" W x 10" L
Max Pressure: 125 psi
Max Temperature: 100ºF (38ºC)
Volume (cubic inch): 16.6
Flow Rate: .5 gpm
Filter Life: 1 year or 1500 gallons
Pipe Size NPT: 1/4"
Omnipure CL10ROT33-B Inline Water Filters have been tested for performance under NSF Standard 42.

Omnipure CL10ROT33-B Filter Replacement Information:
The Omnipure CL10ROT33-B inline filters should be replaced every 1500 gallons or 1 year depending on the quality of your water.
Used as an inline granular activated carbon filter in Stage 5 of the 5-Stage PuROLine 5000 Reverse Osmosis System.
The Omnipure CL-Series CL10ROT33-B 1/4" inline filter can be used in many RO systems as a postfilter for final polishing of the water.
The Omnipure CL10ROT33-B inline filter is the same as the Ametek INCF-10, Omnipure K2533 BB, and P3916.

Omnipure CL10ROT33-B Carbon Inline Water Filter Instructions:
Omnipure CL10ROT33-B water filters should be installed on cold water lines only.
Omnipure CL10ROT33-B water filters should not be used where the water is microbiologically unsafe.

Product Code: CL10ROT33-B

Reminder