| | | |

Water Filters made EASY at

WATER FILTER FINDER^TM in 0 item(s) in cart / TOTAL: $0.00 View Cart

| | | | |
| | | |

Omnipure Q5633 Q-Series Water Filters

2 1/2" W x 12" L; Chlorine Taste & Odor Reduction; 12 x 40 Mesh

Larger View

Omnipure Q5633 Water Filters:
The Q-Series Omnipure Q5633 water filter is easy to install and user friendly.
Designed for quick and simple installation with a twist of the wrist.
The Omnipure Q5633 water filter is an acid washed granular activated carbon (GAC) 12x40 mesh filter.
The Q-Series Q5633 filter improves drinking water and cooking water taste and odor.
The Omnipure Q5633 replacement water filter can be used in beverage equipment, reverse osmosis systems, drinking fountains, ice machines, and other point of use applications.

Omnipure Q5633 GAC Water Filter Contaminant Reduction:
The Omnipure Q5633 reduces Taste & Odor, Chlorine Taste & Odor, and Particulates Class 1.

Omnipure Q5633 Water Filter Specs:
Filter Size: 2.5" W x 12" L
Max Pressure: 125 psi
Max Temperature: 100ºF (38ºC)
Flow Rate: .5 GPM
Filtration Media: Acid Washed Granulated Activated Carbon
Volume Cubic Inch: 35.5
Service Life: 1 Year or 2500 Gallons
Fitting Size: This Q-Series filter is a replacement filter and must be used with an existing Q-Series head. The Q-Series heads are available in 1/4" Quick-Connect fittings, 1/4" NPT female threads, or 3/8" NPT female threads.

Omnipure Q5633 Q-Series GAC Replacement Information:
Easy change system provides a clean method to replace spent cartridges without any mess. Just turn off water & twist to remove filters and replace.
The Omnipure Q5633 water filters should be replaced every 2500 gallons or 12 months depending on the quality of your water.
The Omnipure Q5633 filter is used as a carbon filter in Stage 2 of the 4-Stage PuROTwist 4000 Reverse Osmosis System.
The Q-Series Q5633 filter is also used as a postfilter in Stage 4 of the 4-Stage PuROTwist 4000 Reverse Osmosis System.
The Omnipure Q5633 is used as a carbon filter in Stage 2 of the 3-Stage PuROTwist 3000 Reverse Osmosis System.
Omnipure Twist Tap filter heads QNVH B, C, or J, with or without automatic shutoff.
If you do not have a head for the Omnipure Q-Series filters, you can purchase one of the Omnipure Q-Series heads below in the Related Products section. These heads are valved which means the water will automatically shut off when replacing the Q-Series water filter. The heads are available with 1/4" quick connect fittings, 1/4" NPT, or 3/8" NPT.