- PUR FM-9100 Brushed Stainless Steel Faucet Water Filter System:
- The PUR FM-9100 faucet system has a built-in electronic filter indicator that shows how much filter life remains and when to replace it.
- The PUR FM-9100 faucet filter installs easily in minutes on all standard faucets and without tools.
- The PUR FM-9100 filter provides up to 100 gallons (378 Liters) or 2-3 months of quality water.
- The PUR FM-9100 has a bypass feature that that allows you to switch between filtered and unfiltered water.
- The PUR FM-9100 faucet system comes in Brushed Stainless Steel.
- How the PUR FM-9100 filter works:
Stage 1: Added layer to trap sediment.
Stage 2: Contaminant removal. Activated Carbon Microfilter - The activated carbon filter removes 99.9% of the microbial cysts Cryptosporidium and Giardia. In addition, reduces Lead, Asbestos, Benzene, MTBE and TTHMs.
Stage 3: Filtered over natural minerals for a crisp, refreshing taste.
- The replacement filter for this PUR FM-9100 faucet filter system is the PUR RF-9999 faucet filter.
Filter Life: 3 months or 100 gallons
Size: 6 1/2 inches (length) x 3 1/2 inches (height) x 7 inches (width)
Country of Origin: China
The FM-9100M is also known by the following part numbers:
- Remove the faucet aerator and old washer
- Choose a faucet adapter by selecting the faucet thread style that best matches your faucet
- Ensure rubber washer is inside threaded end of faucet adapter and hand tighten
- Twist front cover off PUR faucet filter unit and insert filter (note: filter will fit loosely in the unit) and replace the cover
- Attach the filter unit to your faucet with the PUR logo facing the front by pushing the unit up until you hear it click onto the faucet
- Run cold water for 5 minutes with the faucet set to the filtered position to flush the filter cartridge (it is normal to see cloudy water and loose materials, or hear air forced out of the filter while flushing the cartridge)
- For filtered water push down on the water switch (do not run this position with hot water)
- For unfiltered water pull up on the water switch (it is okay to run hot water in the filter-off position
Resetting your 'change filter' indicator:
- Installing the new filter cartridge automatically resets the filter life indicator light