select Compare (0)
Compare Products

You have no items to compare.

Pentek 150550 3G Blue Filtration Housing with Integration Bracket

More Views

Pentek 150550 3G Blue Filtration Housing with Integration Bracket

$31.39 (Retail Price: $38.87 )

In stock

    • Quantity
    • Unit Price
    • 1 - 2
    • $31.39
    • 3 - 5
    • $30.49
    • 6 +
    • $29.49
The Pentek 150550 3G housing has 3/4-inch inlet/outlets. The Pentek 3G IB 150550 water filter housing has an integrated bracket so a separate bracket does not need to be purchased. The Pentek 3G MM 150550 filter housing can use any 10-inch L x 2.5-inch W water filter. Two number 10 Standard housings can be connected with a pipe nipple or pipe union. There are several pipe nipples available that can be used to connect two number 10 Standard Housings. Use the NP-34 pipe nipple to connect two number 10 Housings with 3/4-inch inlet/outlets.
  • Genuine OEM Product
  • Pentek 150550 3G SlimLine Housing Specs:
  • Inlet/Outlet: 3/4" NPT
  • Maximum Dimensions: 13-1/4" x 5-3/4" (337 mm x 146 mm)
  • Maximum Temperature: 125 F (51.7 C)
  • Maximum Pressure: 125 psi (8.62 bar)
  • Initial ΔP (psi) @ Flow Rate (gpm): 1 psi @ 10 gpm (0.07 bar @ 38 lpm)
  • Pentek 150550 Materials of Construction:
  • Housing: Styrene Acrylonitrile (Clear)
  • Cap: Reinforced Polypropylene
  • O-Ring: Buna-N
  • Button Assembly: 300-series Stainless Steel, EPDM, and Polypropylene
  • Most Popular Water Filters for the Pentek 150550 #10 Filter Housing:
  • Will accommodate a wide range of 2-1/4" to 3-1/8" diameter cartridges.
  • Sediment Filters:
    P5-10-WF 5 Micron Sediment Filter
    S1 20 Micron Pleated Filter
  • Carbon Filters:
    CBC-10-WF 0.5 Micron Chlorine Taste & Odor and Cyst Reduction Carbon Block Filter
    KDF55-10-WF KDF-55 Taste & Odor Reduction Filter
  • Recommended Parts & Accessories:
  • Replacement OR-34 O-Rings. One o-ring is included with the housing purchase, but you should replace the o-ring periodically to prevent leaks.
  • Use silicone grease to lubricate the o-rings to prevent leaking.
  • Use the SW-2 housing wrench to remove the sump. The wrench should NOT be used to tighten the sump back onto the cap. Over tightening may cause damage to the o-ring.
No reviews have been found

Write Your Own Review

You're reviewing: Pentek 150550 3G Blue Filtration Housing with Integration Bracket

  •  
    1 star
    2 stars
    3 stars
    4 stars
    5 stars
    Rating
  • * Required Fields