Pentek 150574 3G MM Integrated Bracket Water Filter Housing

• Pentek 150574 3G IB MM Water Filter Housing:
• The Pentek 150574 3G housing has 3/4" inlet/outlets.
• The Pentek 150574 housing must be used with one of the two Pentek pressure gauges. The housing will not work if a pressure gauge is not used. The pressure gauge helps to determine when the water filters need to be replaced.
• The Pentek 3G MM 150574 filter housing can use any 10" L x 2.5" W water filter.
• The Pentek 3G IB MM 150574 water filter housing has an integrated bracket so a separate bracket does not need to be purchased.

• Connecting two #10 Standard Housings:
• Two #10 Standard housings can be connected with a pipe nipple or pipe union. There are several pipe nipples available that can be used to connect two #10 Standard Housings. See all combinations of pipe nipple options here.
• NP-34 - Use this pipe nipple to connect two #10 Housings with 3/4" Inlet/Outlets

Flow Rate: 10 gallons per minute

• Manufacturer: Pentek 150574

The 150574 is also known by the following part numbers:

• 150574