select Compare (0)
Compare Products

You have no items to compare.

zoom Pentek 158117 Slim Line #10 Clear 1/4-Inch Housing w/pr

More Views

Pentek 158117 Slim Line #10 Clear 1/4-Inch Housing w/pr

$19.49 (Retail Price: $24.59 )

In stock

    • Quantity
    • Unit Price
    • 1 - 2
    • $19.49
    • 3 - 5
    • $18.89
    • 6 +
    • $18.29
The Pentek 158117 filter housing has 1/4-inch NPT inlet/outlets. The Pentek 158117 slim design reduces space required for installation without sacrificing capacity. FDA Grade. The Pentek 158117 has a leak-proof seal with a top-seated o-ring. The housing has four bosses molded into the cap for mounting purposes. The Pentek 158117 Slim-Line filter housings are an excellent choice for low flow applications and when space and chemical compatibility are concerns. The filter housing is clear to allow for on-site examination of flow, performance, and cartridge flow. The Pentek 158117 is manufactured of clear, Styrene-Acrylonitrile (SAN). The sumps are stress relieved for added clarity and strength. The blue polypropylene caps have a pressure-relief button on the inlet side to relieve pressure inside the housing when changing filter cartridges. The water filter cartridge is not included with the housing. This allows you to purchase the best water filter for your water supply. The Pentek 158117 filter housing uses 10-inch L x 2.5-inch W water filters. Two number 10 Standard housings can be connected with a pipe nipple or pipe union. There are several pipe nipples available that can be used to connect two number 10 Standard Housings. Use the NP-14 pipe nipple to connect two number 10 Housings with 1/4-inch inlet/outlets.
  • Genuine OEM Product
Used In Brands Ametek, Pentek, US Filter
Manufacturer's Id 158117
UPC 799932590085
Materials of Construction Housing: SAN, Cap: Reinforced Polypropylene, O-Ring: Buna-N
Maximum Operating Pressure (psi) 125
Maximum Temperature (°F) 125
Flow Rate (gpm) 5.00
Flow Rate (lpm) 18.93
Fitting Type NPT
Fitting Size (inches) 1/4 inch
Color / Finish Clear
  • Pentek #10 Clear Housing Replacement Water Filter Information:
  • The water filter cartridge is not included with the housing. This allows you to purchase the best water filter for your water supply.
  • The water filter cartridge life depends on the water filter cartridge purchased, the quality of your water, and the amount of water used. You will know when to change the filter cartridge when your water pressure drops.
  • Sediment water filters reduce dirt, sand, silt, sediment, rust particles, and scale particles. Choose from one of our sediment water filters at the 10" L x 2.5" W Water Filter Page.
  • Drinking water filters produce healthier, better-tasting drinking water by reducing chlorine taste and odor and other contaminants. Choose from one of our carbon drinking water filters at the 10" L x 2.5" W Water Filter Page.
  • Most Popular Water Filters for the #10 Clear Filter Housing:
  • Sediment Filters:
    P5 5 Micron Sediment Filter
  • Carbon Filters:
    C-1 5 Micron Chlorine Taste & Odor Reduction Carbon Filter
  • Recommended Parts & Accessories:
  • Replacement OR-38 O-Rings. One o-ring is included with the housing purchase, but you should replace the o-ring periodically to prevent leaks.
  • Use silicone grease to lubricate the o-rings to prevent leaking.
  • Use the SW-1 housing wrench to remove the sump. The wrench should NOT be used to tighten the sump back onto the cap. Over tightening may cause damage to the o-ring.
  • Use a SL-BR stainless steel mounting bracket to mount the whole house housing.

Instructions

No reviews have been found

Write Your Own Review

You're reviewing: Pentek 158117 Slim Line #10 Clear 1/4-Inch Housing w/pr

  •  
    1 star
    2 stars
    3 stars
    4 stars
    5 stars
    Rating
  • * Required Fields