Pentek 158642 3G IB Slim Line #10 Blue 3/8" Housing w/pr
3/8" NPT Inlet/Outlet; Integrated Bracket; Uses 10" x 2.5" Water Filters
 Larger View
|
|
- Pentek 158642 3G Integrated Bracket SlimLine Housing:
- The Pentek 158642 3G Slim Line housing has 3/8" NPT inlet/outlets.
- The Pentek 3G IB 158642 water filter housing has an integrated bracket so a separate bracket does not need to be purchased.
- The Pentek 3G IB 158642 filter housing can use any 10" L x 2.5" W water filter.
- The slim design of the housing reduces space required for installation without sacrificing capacity.
- The Pentek 158642 housing includes a pressure-relief/bleed button.
- The 158642 water filter housing has leak-proof sealing with a top-seated Buna-N o-ring.
- The Pentek 158642 housing accepts proprietary Seal-Safe double o-ring sealing cartridges as well as standard Double Open End (DOE) cartridges.
- Connecting two #10 Standard Housings:
- Two #10 Standard housings can be connected with a pipe nipple or pipe union. There are several pipe nipples available that can be used to connect two #10 Standard Housings. See all combinations of pipe nipple options here.
- NP-38 - Use this pipe nipple to connect two #10 Housings with 3/8" Inlet/Outlets
- Pentek 158642 3G SlimLine Housing Specs:
- Inlet/Outlet: 3/8" NPT
- Maximum Dimensions: 13-3/8" x 5-3/8" (340 mm x 137 mm)
- Maximum Temperature: 125°F (51.7°C)
- Maximum Pressure: 125 psi (8.62 bar)
- Initial ΔP (psi) @ Flow Rate (gpm): 125 psi (8.62 bar)
- Pentek 158642 Materials of Construction:
- Housing: Polypropylene (Opaque)
- Cap: Reinforced Polypropylene
- O-Ring: Buna-N
- Button Assembly: 300-series Stainless Steel, EPDM, and Polypropylene
|
Features
Ace Hardware
