| | | |

Water Filters made EASY at

WATER FILTER FINDER^TM in 0 item(s) in cart / TOTAL: $0.00 View Cart

| | | | |
| | | |

Pentek BP-410-10 Polypropylene Filter Bags (20 Bags/Case)

4" W x 8-5/8" L (102 mm x 218 mm); 10 Micron; Polypropylene

American Plumber / Pentek BP-410-10 Filter Bags:
The Pentek BP-410-10 filter bag is a 10 micron glazed polypropylene felt bag filter.
Polypropylene bags are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms.
The Pentek BP-410-10 bag filter can withstand temperatures up to 200°F (93.3°C).
The Pentek BP-410-10 filter bags are manufactured from felt because of its high solids loading capabilities, in comparison to similar mesh fabrics.
The Pentek BP-410-10 filter media is created by needle-punching two layers of synthetic fibers together in a supporting scrim.
A glazed finish, created by melting the outermost surface fibers, is used to produce a bond that reduces the possibility of migration.
The Pentek BP-410-10 filter bag's thermally welded unique design results in consistent filtration efficiencies.

US Filter / Pentek BP-410-10 Bag Filter Specs:
Dimensions: 4" W x 8-5/8" L (102 mm x 218 mm)
Micron Rating: 10 Micron (Nominal)
Maximum Temperature: 200°F (93.3°C) (bags only)
Filter Media: Glazed Polypropylene Felt
Maximum Flow Rate: 20 gpm*
*Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions.

Bag Filter Housings for the Pentek BP-410-10 Filter Bag:
The Pentek BP-410-10 155387-03 bag filter fits in bag filter housing assemblies for 4" W x 8-5/8" L bag filters.
Use the Pentek PBH-410-1 1" Inlet/Outlet Bag Filter Vessel Water Filter System.
Use the Pentek PBH-410-1.5 1.5" Inlet/Outlet Bag Filter Vessel Water Filter System.

Pentek / Ametek BP-410-10 Water Filter Instructions:
Protect the Pentek BP-410-10 filter bag and the housing against freezing to prevent cracking of the filter and water leakage.
For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.