- Ametek / Pentek CEP-10E Water Filter:
- Nominal 5 micron Pentek CEP-10E Coconut Based Carbon Block Water Filter Cartridges
- The Pentek CEP-10E water filter reduces bad taste & odor and chlorine taste & odor reduction (based on manufacturer's internal testing).
- The benefits of the Pentek CEP-10E replacement filter cartridge are low extractables and minimal pH rise for RO pre- and post-filter applications (based on manufacturer's internal testing).
- The Pentek CEP-10E filter cartridge has enhanced dirt holding capacity (based on manufacturer's internal testing).
- The Ametek CEP-10E water filter cartridges are manufactured from an acid-washed coconut-carbon based formulation that minimizes the pH rise and produces better tasting water.
- The Pentek CEP-10E water filter patented manufacturing process yields a cartridge with a nominal 5-micron filtration rating, low extractables, and a minimal pH rise ideal for RO pre- and post-filter applications. A thin-wall, high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.
- The Pentek CEP-10E filter cartridges are protected by Endurawrap™, a uniquely formulated polyolefin bilaminate prefilter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.
- NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
- Pentek CEP-10E Carbon Water Filter Cartridge Specs:
- Dimensions: 9-3/4" x 2-7/8" (248 mm x 73 mm)
- Temperature Rating: 40°F to 125°F (4.4° C to 51.7°C)
- Initial ∆P (psi) @ Flow Rate (gpm): 3.0 psi @ 1 gpm (0.2 bar @ 3.8 L/min)
- Chlorine Taste & Odor Reduction @ Flow Rate (gpm):
>5,000 gallons @ 1 gpm (18,900 liters @ 3.8 L/min)
NOTE: Based on manufacturer’s internal testing.
- Pentek CEP-10E Carbon Briquette Filter Materials of Construction:
- Filter Media: Acid-Washed Coconut Based Carbon
- End Caps: Polypropylene
- Inner/Outer Wraps: Polyolefin
- Netting: Polyethylene
- Gasket: Buna-N
- Manufacturer: Pentek 155714-43
- Water Filter Housings for the Pentek CEP-10E Filter:
- 155714 Pentek CEP-10E filter fits in housings for 10 inch water filters.
- Fits Culligan / USFilter / Ametek / Pentek 10" Standard Whole House Water Filter System
- Fits Culligan HF-360 Whole House Water Filter System