Whole House Systems
  • Drinking Water Systems
  • Replacement Filters
  • Pentek

    PENTEK-R50-BB

    Pentek R50-BB Pleated Polyester Water Filters (9-3/4-inch x 4-1/2-inch)

    Fits most stand housings built for 10-inch x 4.5-inch filter cartridges
    • High quality, great value replacement filter

    • Filters particles down to 50 microns in size

    • Easy installation and filter exchanges within minutes

    • Provides fresh, cleaner tasting water throughout your home

    format_list_bulleted Features & Specs
    Package Qty: 1
    Manufacturer: Pentair Water
    Manufacturer's Id: R50-BB
    UPC: 051678053430
    Actual Size (in): 9 3/4 inches (length) x 4 1/2 inches (outside diameter)
    Media: Pleated Polyester
    Primary Filter Media: Pleated Polyester
    Operating Temperature (°F): 40 - 125
    Operating Temperature (°C): 4.4 - 51.7
    Brand: Pentek
    Advertised Size: 10 x 4-1/2
    Length (in): 9.75 in
    Outside Diameter (in): 4.5 in
    Width (cm): 11.43 in
    Width (in): 4.5 in
    Materials of Construction: Core: Polypropylene, End Caps: Vinyl Plastisol
    Media Type: Sediment Filter
    Thickness (in): 4.5 in
    UPC's For Search: 10051678053437 | 051678053430
    Micron Rating Nominal: 50
    Netsuite Item Type: Whole House Filters
    description Instructions
    1. Turn off water supply. Press red pressure-relief button (if present).
    2. Unscrew housing. Remove large o-ring, wipe clean and set aside.
    3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly.
    4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
    5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
    6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove.
    7. Insert new filter cartridge.
    8. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
    9. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.
    file_download File Downloads
    warning_amber Contaminants
  • Dirt Sand Sediment
  • Particles
  • Rust And Corrosion
  • Sand
  • Sediment
  • Silt
  • filter_alt Filter Life
    Filter Life (gallons): 6 months
    warning

    WARNING: Prop65 warning applies to products that contain carbon media. Click here for more details

    WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov


    Pentek R50-BB Filter Advanatges

    Pentek R50-BB water filters produce healthier, better-tasting drinking water. The Pentek R50-BB filter cartridge pleated design maximizes dirt-holding capacity. This water filter is versatile and reusable, allowing for a variety of uses. The Pentek R50-BB sediment water filter is manufactured from a durable, non-woven and reusable polyester fabric that is suitable for a wide range of filtration uses. The Pentek R50-BB water filter media is pleated around a polypropylene core for added strength and the ends are immersed in a thermosetting vinyl plastisol. Embedding and sealing each end of the pleat in this fashion fuses the three components together forming a united end cap to gasket unit. The overlap seam is welded to reduce internal bypass improving filtration efficiency. R Series filter cartridges are resistant to both bacteria and chemical attack making them suitable for a variety of residential, commercial and industrial applications. The R50-BB filter can be used on chlorinated or non-chlorinated water supplies.

    Pleated Filter Media

    The Pentek R50-BB uses pleated filter design to maximize contaminant exposure to filter media. More time along the media allows for higher capture and retention of unwanted contaminants. This also allows for greater amounts of larger particles of sediment and sand to collect within the pleats of the filter. This pleated design enhances structural stability and helps increase the performance of the filter.

    Iron Reduction Benefits

    The 10 X 4.5 Pentek R50-BB pleated polyester replacement filter is built to fit 10-inch x 4.5-inch filter housings. This standard sizing allows this filter to easily replace existing styles of whole house filters for housings requiring 10 x 4.5 inch filters. The R50-BB goes to work immediately providing cleaner, fresher water for up to six months. Enjoy cleaner better water with your whole house replacement filter today.

    NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

    For more information please see the related tabs and read the Pentek R50-BB User Guide


    PENTEK-R50-BB   is comparable with the following part number(s)

    • 155053-43
    • PENTEK-R50BB
    • PENTEK-R50-BB
    • R50BB
    {"statementLink":"","footerHtml":"","hideMobile":false,"hideTrigger":false,"disableBgProcess":false,"language":"en","position":"left","leadColor":"#146ff8","triggerColor":"#146ff8","triggerRadius":"50%","triggerPositionX":"left","triggerPositionY":"bottom","triggerIcon":"people","triggerSize":"medium","triggerOffsetX":20,"triggerOffsetY":20,"mobile":{"triggerSize":"small","triggerPositionX":"left","triggerPositionY":"bottom","triggerOffsetX":10,"triggerOffsetY":10,"triggerRadius":"50%"}}