select Compare (0)
Compare Products

You have no items to compare.

zoom Pentek ECP1-20 Pleated Sediment Water Filters (20-inch x 2-5/8-inch)

More Views

Pentek ECP1-20 Pleated Sediment Water Filters (20-inch x 2-5/8-inch)

$17.89 (Retail Price: $22.67 )

In stock

    • Quantity
    • Unit Price
    • 1 - 2
    • $17.89
    • 3 - 5
    • $17.39
    • 6 +
    • $16.79
Pentek ECP1-20 water filter cartridge has a special formulation of resin-impregnated cellulose and polyester fibers. The Pentek ECP1-20 water filters provide higher wet strength than regular cellulose cartridges. The Pentek ECP1-20 water filters also provide high flow rates and dirt-holding capacity, while maintaining extremely low pressure drop. The Pentek ECP1-20 replacement filter cartridge has minimal unloading and media migration. The Pentek ECP1-20 water filter media is pleated around a polypropylene core for added strength and the ends are immersed in a thermosetting vinyl plastisol. Embedding and sealing each end of the pleat block in this fashion fuses the components together, forming a unitized end cap and gasket. The new ECP water filter cartridges contain more media surface area than most competitive cartridges. The standard 20-inch ECP cartridges contain 12 square feet of media. The Pentek ECP1-20 replacement filter cartridge is recommended for chlorinated water supplies. It is not recommended for non-chlorinated water supplies. Cellulose may start to break down if there is bacteria present in well water or other non-chlorinated water supplies. NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The Pentek ECP Series cartridges have end caps that are color-coded for micron rating: Tan = 1 micron, White = 5 micron, Blue = 20 micron and Yellow = 50 micron. Nominal 1 micron Pentek ECP1-20 Pleated Cellulose Polyester Water Filter Cartridge.
  • Genuine OEM Product
Reduces the following contaminants:
  • Dirt
  • Fine Sand
  • The PENTEK-ECP1-20 does not reduce fluoride
  • Hard Scale
  • Rust and Corrosion
  • Sand
  • Sediment
Used In Brands Ametek, Culligan, Pentek, US Filter
Manufacturer's Id ECP1-20
UPC 051678485439
Advertised Size (in) 20 x 2-1/2
Actual Size (in) 20 inches (length) x 2-1/2 inches (outside diameter)
Actual Size (cm) 50.8 x 6.35
Media Cellulose Polyester
Primary Filter Media Pleated Fabric
Materials of Construction Core: Polypropylene, End Caps: Vinyl Plastisol
Filter Life (months) 6
Micron Rating (Nominal) 1
Operating Temperature (°F) 40 - 125
Operating Temperature (°C) 4.4 - 51.7
Flow Rate (gpm) 10
Flow Rate (lpm) 37.854
Additional Information End Cap Color: Tan
  • Pentek ECP1-20 Water Filter Housings:
  • 255485 Pentek ECP1-20 filter fits in housings for 20 inch water filters.
  • Fits Culligan / USFilter / Ametek / Pentek 20" Standard Whole House Water Filter System

1 Item(s)

per page
Performance + Review by Phil
Rating
I am a home owner with public water. I installed a water softener and wanted to protect it from silt build up. Much to my surprise when I changed the filter for the first time. It was BROWN and sandy..Silt.. particles. Twice a year the township backwashes it system and during those times.. "SLUDGE" is captured. Clearly.. how could our water be the best it could be? I have used the 10micron, 5 micr (Posted on 10/12/08)

Write Your Own Review

You're reviewing: Pentek ECP1-20 Pleated Sediment Water Filters (20-inch x 2-5/8-inch)

  •  
    1 star
    2 stars
    3 stars
    4 stars
    5 stars
    Rating
  • * Required Fields