Larger View
Retail Price: $8.61
|
|
- Ametek / Pentek ECP5-10 Water Filter Cartridges:
- Nominal 5 micron Pentek ECP5-10 Pleated Cellulose Polyester Water Filter Cartridges.
- Pentek ECP5-10 water filter cartridges have a special formulation of resin-impregnated cellulose and polyester fibers.
- The Pentek ECP5-10 water filters provide higher wet strength than regular cellulose cartridges.
- The Pentek ECP5-10 water filters also provide high flow rates and dirt-holding capacity, while maintaining extremely low pressure drop.
- The Pentek ECP5-10 replacement filter cartridge has minimal unloading and media migration.
- The Pentek ECP5-10 water filter media is pleated around a polypropylene core for added strength and the ends are immersed in a thermo-setting vinyl plastisol. Embedding and sealing each end of the pleat block in this fashion fuses the components together forming a unitized end cap and gasket.
- The Pentek ECP water filter cartridges contain more media surface area than most competitive cartridges. The standard 10" ECP cartridges contain six square feet of media, where most cartridges contain only 4.5 square feet.
- The Pentek ECP5-10 replacement filter cartridge is not recommended for non-chlorinated water supplies. Cellulose may start to break down if there is bacteria present in well water or other non-chlorinated water supplies.
- NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
- Pentek ECP5-10 Pleated Cellulose Water Filter Cartridge Specs:
- Dimensions: 9-3/4" x 2-5/8" (248 mm x 67 mm)
- Micron Rating (Nominal): 5 Micron
- Temperature Rating: 40F to 125F (4.4C to 51.7C)
- Initial ∆P (psi) @ Flow Rate (gpm):
<1 psi @ 10 gpm (<0.1 bar @ 38 L/min) - Pentek ECP5-10 Sediment Filter Materials of Construction:
- Filter Media: Cellulose Polyester
- Core: Polypropylene
- End Caps: Vinyl Plastisol
- Manufacturer: Pentek 255482-43
- Water Filter Housings for the Pentek ECP5-10 water filters:
- 255482 Pentek ECP5-10 filter fits in housings for 10 inch water filters.
- Fits Culligan / USFilter / Ametek / Pentek 10" Standard Whole House Water Filter System
- Fits Culligan HF-360 Whole House Water Filter System
|