select Compare (0)
Compare Products

You have no items to compare.

zoom Pentek ECP50-10 Pleated Sediment Water Filter (Sold Individually)

More Views

Pentek ECP50-10 Pleated Sediment Water Filter (Sold Individually)

$8.99 (Retail Price: $11.99 )

In stock

    • Quantity
    • Unit Price
    • 1 - 2
    • $8.99
    • 3 - 5
    • $8.79
    • 6 +
    • $8.59
Pentek ECP50-10 water filter cartridges have a special formulation of resin-impregnated cellulose and polyester fibers. The Pentek ECP50-10 water filters provide higher wet strength than regular cellulose cartridges. The Pentek ECP50-10 water filters also provide high flow rates and dirt-holding capacity, while maintaining extremely low pressure drop. The Pentek ECP50-10 replacement filter cartridge has minimal unloading and media migration. The Pentek ECP50-10 water filter media is pleated around a polypropylene core for added strength and the ends are immersed in a thermosetting vinyl plastisol. Embedding and sealing each end of the pleat block in this fashion fuses the components together, forming a unitized end cap and gasket. The Pentek ECP water filter cartridges contain more media surface area than most competitive cartridges. The standard 10-inch ECP cartridges contain six square feet of media, where most cartridges contain only 4.5 square feet. The Pentek ECP50-10 replacement filter cartridge is not recommended for non-chlorinated water supplies. Cellulose may start to break down if there is bacteria present in well water or other non-chlorinated water supplies. NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The Pentek ECP Series cartridges have end caps that are color-coded for micron rating: Tan = 1 micron, White = 5 micron, Blue = 20 micron and Yellow = 50 micron. Nominal 50 micron Pentek ECP50-10 Pleated Cellulose Polyester Water Filter Cartridge.
  • Genuine OEM Product
Reduces the following contaminants:
  • Dirt
  • Fine Sand
  • The PENTEK-ECP50-10 does not reduce fluoride
  • Hard Scale
  • Rust and Corrosion
  • Sand
  • Sediment
Used In Brands Ametek, Culligan, Pentek, US Filter
Manufacturer's Id ECP50-10
UPC 051678484432
Advertised Size (in) 10 x 2-1/2
Actual Size (in) 9 3/4 inches (length) x 2 5/8 inches (outside diameter)
Actual Size (cm) 24.77 x 6.67
Media Cellulose Polyester
Primary Filter Media Pleated Fabric
Materials of Construction Core: Polypropylene, End Caps: Vinyl Plastisol
Filter Life (months) 6 months
Micron Rating (Nominal) 50
Operating Temperature (°F) 40 - 125
Operating Temperature (°C) 4.4 - 51.7
Flow Rate (gpm) 10
Flow Rate (lpm) 37.854
Additional Information End Cap Color: Yellow

1 Item(s)

per page
GREAT ECONOMICAL FILTER Review by G the Incidenta
The water from my well is very hard and full of iron. After going through an iron filter, my water passes trought this 50 micron Pentek filter on its way to a softner. The filters take out a great deal of iron and other sediment without a big drop in system pressure. They last anywhere from 2 to 4 months depending on the turbidity of my water and are very easy to change. (Posted on 1/11/11)

Write Your Own Review

You're reviewing: Pentek ECP50-10 Pleated Sediment Water Filter (Sold Individually)

    1 star
    2 stars
    3 stars
    4 stars
    5 stars
  • * Required Fields