select Compare (0)
Compare Products

You have no items to compare.

Pentek EPM-BB Carbon Block Water Filters (9-3/4-inch x 4-5/8-inch)

More Views

Pentek EPM-BB Carbon Block Water Filters (9-3/4-inch x 4-5/8-inch)

$26.99 (Retail Price: $34.79 )

In stockShips Tomorrow, Aug 01st

    • Quantity
    • Unit Price
    • 1 - 2
    • $26.99
    • 3 - 5
    • $26.19
    • 6 +
    • $25.39
The Pentek EPM-BB filter cartridges have the highest carbon block dirt-holding capacity for maximum cartridge life (based on manufacturer's internal testing). The Pentek EPM-BB replacement cartridges reduce bad taste & odor and chlorine taste & odor (based on manufacturer's internal testing). Low pressure drop. Manufactured using a patented process that yields a cartridge with a nominal 10 micron filtration rating, high porosity and chlorine taste & odor reduction. The high porosity design helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop. The Pentek EPM-BB filter cartridges are protected by Endurawrap, a uniquely formulated polyolefin bilaminate prefilter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges. The Pentek EPM-BB cartridges are manufactured entirely from FDA-compliant materials making them an ideal choice for a wide range of residential, food service, commercial and industrial applications. Cartridges will contain a very small amount of carbon fines (very fine black powder) and a new cartridge after installation should be flushed with sufficient water to remove all traces of the fines from your water system before using the water. Each time you use your filtered water tap for drinking or cooking purposes it is recommended that you run (flush) the tap for at least 20 seconds prior to using water. NOTE: Performance capacity depends on system design, flow rate and certain other application conditions. The Pentek EPM-BB cartridges are a modified version of the EP Series cartridge. When greater chlorine taste & odor reduction is needed, use the EP-BB water filter. NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
  • The Pentek EPM-BB water filters are Nominal 10 micron Modified Epsilon Carbon-Briquette Water Filter Cartridges
  • Genuine OEM Product
Reduces the following contaminants:
  • 90% of Chlorine Taste & Odor
  • Dirt
  • The PENTEK-EPM-BB does not reduce fluoride
  • Sediment
Used In Brands Ametek, Culligan, Pentek, US Filter
Manufacturer's Id EPM-BB
UPC 051678782439
Advertised Size (in) 10 x 4-1/2
Actual Size (in) 9 3/4 inches (length) x 4 5/8 inches (outside diameter)
Actual Size (cm) 24.77 x 11.7475
Media Bonded Powder-Activated Carbon
Primary Filter Media Activated Carbon Block
Materials of Construction Outer Wrap: Polyolefin, End Caps: Polypropylene, Netting: Polyethylene, Gaskets: Buna-N
Filter Life (gallons) 15,000
Filter Life (liters) 56,781.15
Filter Life (months) 6 months
Micron Rating (Nominal) 10
Operating Temperature (°F) 40 - 180
Operating Temperature (°C) 4.4 - 82.2
Flow Rate (gpm) 2
Flow Rate (lpm) 7.571
  • Water Filter Housings for the Pentek EPM-BB water filters:
  • 155782 Pentek EPM-BB filter fits in housings for 10 inch Big Blue water filters.
  • Fits Culligan / USFilter / Ametek / Pentek 10" Big Blue Whole House Water Filter System
  • Fits Culligan / USFilter / Ametek / Pentek HD-950 Whole House Water Filter System

1 Item(s)

per page
Great performance al good price Review by Vidal
Rating
Easy to install and good performance (Posted on 10/5/09)

Write Your Own Review

You're reviewing: Pentek EPM-BB Carbon Block Water Filters (9-3/4-inch x 4-5/8-inch)

  •  
    1 star
    2 stars
    3 stars
    4 stars
    5 stars
    Rating
  • * Required Fields