 Larger View
Retail Price: $22.79
|
|
- Pentek FLOPLUS-10 High Flow Carbon Water Filter:
- Pentek FloPlus-10 water filter cartridges utilize a revolutionary new technology that significantly enhances the traditional Fibredyne product.
- The Pentek FLOPLUS-10 water filter is ideal for users looking for a product that offers high flow, low pressure drop, infrequent cartridge changes and cyst-free water.
- Maximum life—dirt-holding ability of a 10-micron carbon block with the particulate efficiency of a 0.5-micron cartridge.
- 99.95% reduction of Cryptosporidium and Giardia cysts.
- The Pentek FloPlus-10 filter 455903-43 has outstanding chlorine taste & odor reduction.
- The FloPlus 10 water filter has a high flow rates and low pressure drop similar to a nominal 10-micron filter cartridge.
- The Pentek FloPlus-10 filter is Tested and Certified by NSF International to NSF/ANSI Standard 53 for the reduction of Cysts.
- NOTE: The Pentek FLOPLUS-10 cartridges will contain a very small amount of fines (very fine powder) and new cartridges, after installation, should be flushed with sufficient water to remove all traces of fines from your water system before use.
- Pentek FLOPLUS-10 Modified Molded Carbon Block Cartridge Specs:
- Dimensions: 9-3/4" L x 2-7/8" W (248 mm x 73 mm)
- Initial ΔP (psi) @ Flow Rate (gpm): 2 psi @ 1 gpm( 0.1 bar @ 3.8 L/min)
- Chlorine Taste & Odor Reduction @ Flow Rate (gpm): 10,000 gallons @ 1 gpm (>37,800 L @ 3.8 Lpm)
- Temperature Rating: 40°F to 180°F (4.4° C to 82.2°C)
- Nominal Micron Rating: 0.5 Micron
- Pentek FLOPLUS-10 Water Filter Materials of Construction:
- Filter Media: Bonded PAC
- End Caps: Polypropylene
- Netting: Polyethylene
- Gasket: Santoprene
- Manufacturer: Pentek 455903-43
|
Features
