| | | |

Water Filters made EASY at

WATER FILTER FINDER^TM in 0 item(s) in cart / TOTAL: $0.00 View Cart

| | | | |
| | | |

Pentek NMO400P4S Nylon Filter Bags (20 Bags/Case)

4.1" W x 14" L; 400 Microns; Pentek # 255109

Larger View

Pentek NMO400P4S Nylon Monofilament Filter Bags:
The Pentek NMO400P4S bag filters are rated to nominal 400 microns.
The Pentek NMO400P4S bag filter has a galvanized carbon steel ring sewn in at the top of the filter bag. The filter bag also comes with a handle for fast, easy bag filter changes.
The NMO400P4S filter bag is made of FDA-compliant materials. These high flow filter bags are single layer for straining and filtering at high flow rates.
The Pentek NMO400P4S Nylon Filter Bags are a Size #4 which means they are 4.1 inches in diameter and 14 inches in length. The bag filter area is 1.0 square feet.
Pentek NMO400P4S Nylon bag filters are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms.
The Pentek NMO400P4S Nylon Monofilament Filter Bags can withstand temperatures up to 300°F.
There is an initial pressure drop of less than 0.5 psi for the maximum rated flow at 68 degrees Farenheit. Differential pressure of 15 psi indicates the filter bag needs to be changed.

Pentek NMO400P4S Bag Water Filter Specs:
Dimensions: 4.1" W x 14" L
Filter Size: # 4
Micron Rating: 400 Microns
Maximum Temperature: 300°F (bags only)
Filter Media: Nylon monofilament
Filter Finish: Glazed
Ring Material: Galvanized Carbon Steel
Area (Square-Ft.): 1.0
Maximum Flow Rate: 50 gpm*
*Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions.