1 micron Pentek P1-20 spun bonded-polypropylene water filter cartridges
Pentek P1-20 water filter cartridges produce healthier, better-tasting drinking water.
Pentek P1-20 water filters are manufactured from pure 100% polypropylene.
Pentek P1-20 replacement filter cartridges are designed for purity and chemical compatibility.
The Pentek P1-20 spun fibers form a true gradient density from outer to inner surfaces.
The Pentek P1-20 replacement water filter will not impart taste, odor or color to the liquid being filtered when used within the recommended temperature limit.
The Pentek P1-20 filter cartridge polypropylene construction provides superior chemical resistance and is not prone to bacterial attack.
The Pentek P1-20 water filters can be used on chlorinated or non-chlorinated water supplies.
The coreless strength of the Ametek P1-20 water filter cartridge is achieved by sintering the many fibers into a solid matrix.
The Pentek P1-20 is Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.
NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
The Pentek P1-20 water filter is the same filter as the Everpure DEV910911 filter.
Pentek P1-20 Polypropylene Water Filter Cartridge Specs:
Dimensions: 20" x 2-3/8" (508 mm x 60 mm)
Micron Rating (Nominal): 1 Micron
Temperature Rating: 40°F to 145°F (4.4°C to 62.8°C)