 Larger View
Retail Price: $32.99
|
|
- Pentek / Ametek PCF1-10MB Deionization Water Filter Cartridge:
- The Pentek PCF1-10MB water filter cartridges are made of FDA D.I. Resin Mixed Bed Deionization.
- Pentek PCF1-10MB filters are designed for deionizing water up to 16 megohms.
- The Pentek PCF1-10MB filters are manufactured using an FDA-compliant resin that has been subjected to additional postproduction steps to minimize the total organic carbon (TOC) level.
- The PCF1-10MB are convenient and cost effective for many applications where low levels of total organic carbon (TOC) and total dissolved solids (TDS) are required.
- PCF Series cartridges have been developed in response to the requirements for deionized water in many industries.
- These high-capacity, semi-conductorgrade resin cartridges are ideal for use in pharmaceutical and medical laboratories, cosmetics, and circuit board printing applications.
- NOTE: For drinking water use, do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
- NOTE: Do not use cartridges on equipment that has an electric conductivity water level indicator.
- Also branded under Pentek / Ametek / Culligan / Kleen Plus / Plymouth Products / Pentair / American Plumber / US Filter
- Commercial and Industrial Applications for Deionization Water Filters:
- Circuit board printing
- Pharmaceutical use
- Steam and humidification
- Cosmetics
- Steam processors
- Humidification systems
- Recirculating/cooling towers
- Power generating equipment
- Medical/laboratory use
- Lasers
- Jet water sprayers
- Boiler make-up water
- Pentek PCF1-10MB Deionization Filter Cartridge Specs:
- Dimensions: 9-3/4" x 2-2/3" (248 mm x 68 mm)
- Capacity Grains (mg TDS as CaCO3): 270 (17,500)
- Initial ΔP (psi) @ Flow Rate (gpm):
1.5 psi @ 0.25 gpm (0.10 bar @ .95 L/min) - Suggested Flow Rate: 0.25 gpm (0.95 L/min)
- Temperature Rating: 40°F to 100°F (4.4°C to 37.8°C)
- Pentek PCF1-10MB Deionization Water Filter Materials of Construction:
- Filter Media: Mixed bed DI resins
- End Caps, Shell, Pre-Filter, and Post-Filter: Polypropylene
- Gasket: Buna-N
- Manufacturer: Pentek 155273-43
- Water Filter Housings for the Pentek Deionization PCF1-10MB filter:
- Pentek 155273 PCF1-10MB FDA D.I. Resin filter fits in standard and Slim Line housings for 10 inch Standard water filters.
- Fits in Culligan / USFilter / Ametek / American Plumber / Pentek 10" Standard Water Filter System
|
Features
