- Pentek PL88-152FA415 304 Stainless Steel Filter Bag Housing:
- The Pentek PL88-152FA415 is a bag filter housing made of 304 stainless steel. The heavy duty design can be used for numerous commercial and industrial applications. The housing is ideal for high flow, high temperature or high-pressure applications.
- The Pentek PL88-152FA415 Strap Band Bag Housings are designed for commercial and industrial applications where high flow, temperature and pressure are a requirement.
- The exterior of the PL88 filter bag housings are powder coated with epoxy for extra protection. Housings are engineered to handle a maximum temperature of 300°F and a pressure rating of 150 psi.
- The Pentek PL88152FA415 filtration housings are supplied with a removable basket made of 304 Stainless Steel and a 9/64 perforation.
- The Pentek PL88-152FA415 filter bag housing lid is secured with a Quick Swing Strap Band, which requires no tools to remove. The band does not require full removal to access the bag filter, allowing quicker filter changes.
- The staggered inlet/outlet design offers greater flexibility in installation and service of the housing. The connection size of the Pentek PL88-152FA415 housing is 2-inch ANSI Flanged.
- The Pentek PL88 Series housings include 1/2-inch NPT drain port and 1/4-inch NPT differential pressure ports.
- Steel stands are included with the housings. The stands are adjustable to change the height or position of the housing. Pre-drilled holes in the legs and stands allow the housings to be securely bolted to the floor.
- The Pentek PL88-152FA415 steel strap band housing uses Size # 1 (7-1/16" W x 16-1/2" L) filter bags.
- Pentek Strap Band Bag Filter Housing Product Manual
- Pentek PL88-152FA415 Steel Strap Band Bag Filter Housing Specs:
- Model: PL88-#1
- Basket Size: 15" (381 mm)
- Height (not including stand): 24.9" (632.5 mm)
- Pipe Size Connection: 2" Flange
- Maximum Temperature: 300ºF (149 ºC)
- Maximum Pressure: 150 psi (10.34 bar)
- Flow Rate of Basket: 220 GPM (946 Lpm)
- Filter Bag Size: #1 (7-1/16" W x 16-1/2" L)
- Pentek PL88-152FA415 Steel Strap Band Housing Materials of Construction:
- Housing: 304 Stainless Steel
- Finish: External Epoxy Powder Coating
- Sealing Gasket/O-Ring Lid: Buna-N
- Basket: 9/64 Perforation in 304 Stainless Steel
- Manufacturer: Pentek 156533-43
- Pentek PL88-152FA415 Steel Strap Band Replacement Bag Filters:
- A variety of filter bag micron ratings and media types are available providing countless combinations for numerous applications.
- Use the Size # 1 filter bags which are 7-1/16" W x 16-1/2" L. The filter bag area is 2 square feet.
- Pentek PL88-152FA415 Steel Strap Band Bag Vessel Housing Instructions:
- If pressure exceeds 150 psi (10.34 bar) at any time, a pressure regulator must be used.
- Protect against freezing to prevent cracking of the filter and water leakage.
- Not recommended for applications with TDS or chlorides >1000 ppm and/or pH <5.0. Use of this product in these conditions will void the limited warranty.