Sold in Case Quantities Only.
One Case Includes 20 Bag Filters.
- Pentek PO25G3S Polypropylene Felt Filter Bags:
- The Pentek PO25G3S bag filters are rated to nominal 25 microns.
- The Pentek PO25G3S bag filter has a galvanized carbon steel ring sewn in at the top of the filter bag. The filter bag also comes with a handle for fast, easy bag filter changes.
- The PO25G3S filter bag is made of FDA-compliant materials. These high flow filter bags are single layer for straining and filtering at high flow rates.
- The Pentek PO25G3S Polypropylene Felt Filter Bags are a Size #3 which means they are 4.1 inches in diameter and 8 inches in length. The bag filter area is 0.5 square feet.
- Pentek PO25G3S Polypropylene Felt bag filters are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms.
- The Pentek PO25G3S Polypropylene Felt Filter Bags can withstand temperatures up to 200°F.
- There is an initial pressure drop of less than 0.5 psi for the maximum rated flow at 68 degrees Farenheit. Differential pressure of 15 psi indicates the filter bag needs to be changed.
- Pentek PO25G3S Bag Water Filter Specs:
- Dimensions: 4.1" W x 8" L
- Filter Size: # 3
- Micron Rating: 25 Microns
- Maximum Temperature: 200°F (bags only)
- Filter Media: Polypropylene Felt
- Filter Finish: Glazed
- Ring Material: Galvanized Carbon Steel
- Area (Square-Ft.): 0.5
- Maximum Flow Rate: 20 gpm*
*Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions.
- Manufacturer: Pentek 255083-03
- Pentek PO25G3S Filter Bag Alternate Part #'s:
- Pentek # P025G3S Filter Bag
- Pentek # 255083-03 Filter Bag
- Formerly Ametek # 255083 Filter Bag
- Formerly US Filter # 255083-75 Filter Bag